摘要
对以9350EOS-3-PRO三代像增强器和MC1362高速相机为平台搭建的高速采集系统进行了简单介绍,对可能影响像增强器工作的外部因素进行了实验分析。从电压和照度两个方面出发,通过实验采集数据并用MATLAB软件处理后得到结果。分析结果表明,当电压在2.98 V^4.22 V之间时,成像效果无明显变化,但在低照度环境下能显著提高成像效果,在高照度环境下工作容易饱和。
A simple introduction to a high-speed acquisition system is made based on 9350EOS- 3- PRO third generation image intensifier and MC1362 high speed cameras. External factors may affect the operation of the image intensifier were experimentally analyzed. From two parameters： voltage and luminance gain,these experimental data are collected,and then results are obtained by using MATLAB software post-processing. Analysis for the results showed that when voltage changes between 2. 98V ~ 4. 22V,there is no significant change in the imaging result.System could improve the image quality significantly in the low illumination,but likely to occur saturate in the high illumination and need further improvement.
出处
《电子器件》
CAS
北大核心
2015年第2期287-290,共4页
Chinese Journal of Electron Devices
基金
教育部科学技术研究重点项目(211027)
关键词
高速摄影
像增强器
MATLAB
电压
照度
high speed photography
image intensifier
MATLAB
voltage
luminance gain
