摘要
This paper presents a low phase-noise fractional-N frequency synthesizer which provides an inphase/quadrature-phase（I/Q） signal over a frequency range of 220–1100 MHz for wireless networks of industrial automation（WIA） applications. Two techniques are proposed to achieve the wide range. First, a 1.4–2.2 GHz ultralow gain voltage-controlled oscillator（VCO） is adopted by using 128 tuning curves. Second, a selectable I/Q divider is employed to divide the VCO frequency by 2 or 3 or 4 or 6. Besides, a phase-switching prescaler is proposed to lower PLL phase noise, a self-calibrated charge pump is used to suppress spur, and a detect-boosting phase frequency detector is adopted to shorten settling time. With a 200 k Hz loop bandwidth, lowest measured phase noise is 106 dBc/Hz at a 10 k Hz offset and 131 dBc/Hz at a 1 MHz offset. Fabricated in the TSMC 0.18 μm CMOS process, the synthesizer occupies a chip area of 1.2 mm^2, consumes only 15 m W from the 1.8 V power supply,and settles within 13.2 s. The synthesizer is optimized for the WIA applications, but can also be used for other short-range wireless communications, such as 433, 868, 916 MHz ISM band applications.
This paper presents a low phase-noise fractional-N frequency synthesizer which provides an inphase/quadrature-phase（I/Q） signal over a frequency range of 220–1100 MHz for wireless networks of industrial automation（WIA） applications. Two techniques are proposed to achieve the wide range. First, a 1.4–2.2 GHz ultralow gain voltage-controlled oscillator（VCO） is adopted by using 128 tuning curves. Second, a selectable I/Q divider is employed to divide the VCO frequency by 2 or 3 or 4 or 6. Besides, a phase-switching prescaler is proposed to lower PLL phase noise, a self-calibrated charge pump is used to suppress spur, and a detect-boosting phase frequency detector is adopted to shorten settling time. With a 200 k Hz loop bandwidth, lowest measured phase noise is 106 dBc/Hz at a 10 k Hz offset and 131 dBc/Hz at a 1 MHz offset. Fabricated in the TSMC 0.18 μm CMOS process, the synthesizer occupies a chip area of 1.2 mm^2, consumes only 15 m W from the 1.8 V power supply,and settles within 13.2 s. The synthesizer is optimized for the WIA applications, but can also be used for other short-range wireless communications, such as 433, 868, 916 MHz ISM band applications.
基金
supported by the National High Technology Research and Development Program of China(No.2011AA040102)
