摘要
研制一种自动连续丝电爆法制备纳米金属粉体的装置．在初始充电电压为5-9kV时进行电爆实验，并对制得的纳米镍粉进行表征。结果表明：该装置可实现自动连续的电爆过程，制得的纳米镍体呈青灰色；粒径较小时，颗粒近似为正方体形，粒径较大时，颗粒为球形或类球形；增大初始充电电压可有效减小纳米镍粉颗粒粒径的分布范围：初始充电电压大于7kV时，可制得平均粒径小于30nm且粒径分布均匀的纳米镍粉．
A device for nano-particles production by auto-continuous wire electrical explosion was developed. A series of electrical explosion experiments were carried out with initial charging voltages of 5-9 kV. The prepared Ni nano-particles were characterized. The results show that the electrical explosion procedure can be realized automatically and continuously. Ni nano-particles prepared by the device are grey. The particles were approximately cube-shaped with small particle size, and were spherical or spheroidal with larger particle size. Increasing the initial charging voltage can reduce the distribution range ofNi nano-particles size effectively. When the initial charging voltage is greater than 7 kV, Ni nano-particles with average particle size of less than 30 nm and uniform particle size can be obtained.
出处
《中国粉体技术》
CAS
北大核心
2014年第6期52-55,共4页
China Powder Science and Technology
基金
国家自然科学基金项目
编号:51061011
关键词
自动连续丝电爆法
纳米镍粉
粒径分布
auto-continuous wire electrical explosion
Ni nano-particles
particle size distribution
