期刊文献+

固溶和时效处理对Al0.6Fe0.25Cu合金冷拉拔导线组织和性能的影响 被引量:4

Effect of Solution Treatment and Aging on Microstructure and Properties of Cold Drawn Al0.6Fe0.25Cu
下载PDF
导出
摘要 利用正交实验法对Al0.6Fe0.25Cu合金冷拉拔导线固溶和时效工艺参数进行优化,并对处理前后的组织和性能进行了研究。结果表明,在优先保证电导率并兼顾抗拉强度及伸长率的原则下,Al0.6Fe0.25Cu铝合金冷拉拔后固溶和时效处理的最优工艺参数为470℃固溶1h和120℃时效12h。经该工艺处理后,合金导线的电导率达60.49%IACS。 The solution treatment and aging process parameters of cold drawn Al0.6Fe0.25 Cu alloy were optimized by the orthogonal experiment method. The microstructure and properties were studied. The results show that the optimal process parameters of the solid solution and aging treatment is solution treatment at 470 ℃ for 1 h and aging at 120 ℃ for 12 h by the principle of in preference to ensure the electrical conductivity, and consideration to tensile strength and elongation. The electrical conductivity of the experimental alloy is 60.49%IACS after solution treatment at 470 ℃ for 1 h and aging at 120℃ for 12 h.
出处 《铸造技术》 CAS 北大核心 2014年第11期2547-2550,共4页 Foundry Technology
基金 河南省教育厅重点科技攻关项目(13B430982) 郑州市科技创新团队资助项目(10CXTD159)
关键词 Al0.6Fe0.25Cu合金 固溶 时效 电导率 力学性能 Al0.6Fe0.25Cu alloy solution treatment aging electrical conductivity mechanical properties
  • 相关文献

参考文献5

二级参考文献33

  • 1周振平,李荣德,马建超.热速处理对Al-Fe合金组织与性能的影响[J].中国有色金属学报,2004,14(8):1420-1425. 被引量:12
  • 2覃继宁,张荻,张国定,J.C.Lee.6061铝合金ECAP变形后退火组织稳定性和织构变化[J].中国有色金属学报,2005,15(4):519-523. 被引量:7
  • 3乌曼斯基 赵坚等(译).金属物理[M].北京:冶金工业出版社,1985.386,108. 被引量:2
  • 4[1]Yamada K, Sato T. Role of quenched-in excess vacanies in two-step aging behavior of AI-Mg-Si alloys [J]. J Japan Institute of Metals, 2001, 65(10): 897-902. 被引量:1
  • 5[2]Ikeno S, Matsui H, Matsuda K, et al. DSC Measurement and HRTEM observa-tion of precipitates in an Al-1.6mass% Mg2Si alloys [J]. J Japan Institute of Metals, 2001, 65(5): 404-408. 被引量:1
  • 6[3]Weatherly G C, Perovic A, Mukhopadhyay N K, et al. The precipitation of the Q phase in an AA6111 alloy [J]. Metallurgical and Materials Transactions, 2001, 32A(2):213-218. 被引量:1
  • 7[5]Hunsicker H Y, Stumot HC. In the sorby centennial symposium on history of metallurgy, Smith C S, ed. Metallurgical Society Conference, Vol. 27, [C]. New York: Gordon and Breach, 1965. 271-330. 被引量:1
  • 8[6]An Y G, Zhuang, L gterH V, et al. Fast aging kinetics of the AA6016 Ai-Mg-Si alloy and the application in forming process [J]. Metallurgical and Materials Transactions, 2001, 32A(2): 213-218. 被引量:1
  • 9[7]Motohisa Miyafuji. Poformence of KFC-SH and KLF194-SHT copper alloys in high-strength and high-conductivity for lead-frame [J]. Journal of the Japan Copper and Brass Research Association, 1990, 29: 224-233. 被引量:1
  • 10[8]Lockyer S A, Noble F W. Precipitate structure in a Cu-Ni-Si alloy [J]. Journal of Materials Science, 1994, 29:218-226. 被引量:1

共引文献9

同被引文献38

引证文献4

二级引证文献13

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部