摘要
松软煤层瓦斯抽采孔的深孔施工技术在现有的钻进工艺下不能很好的满足要求。为了提高松软煤层钻进的时效和孔深,提出了煤矿井下松软煤层泡沫钻进工艺,并在淮北邹庄矿进行了现场试验。分析了3个试验孔的具体工况,提出了较为合理的解决方法,使钻孔深度达到了200 m。这不仅有效增加了在松软煤层中的成孔深度,提高了成孔率,还降低了孔口的粉尘污染。
The development and utilization of soft coal seam is increasingly important as the coal resources become scarcer,however, the existing drilling technology is relatively backward. To meet the needs of drilling in soft coal, a newtechnology, which is drilling with foam in soft coal seam in Huaibei Zouzhuang mine, is discussed in this paper. In thefield tests, the foam in 1^# well could not form a circle. The well wall collapsed in 2# well and typical phenomenon ofreturning slag was observed in 4^# well. This paper makes a detailed analysis for specific accidents, and carries outreasonable solutions. 3 wells of depth greater than 200m were finished in the field tests, which not only effectively increasedthe drilling depth in soft seam and the success rate of drilling projects, but also decreased the dust pollution in the field.
出处
《煤田地质与勘探》
CAS
CSCD
北大核心
2014年第6期114-116,共3页
Coal Geology & Exploration
基金
科研院所技术开发专项资金项目(2010EG122194)
关键词
松软煤层
泡沫钻进工艺
现场试验
工况分析
soft coal seam
foam drilling technology
field tests
performance analysis
