期刊文献+

聚丙烯废弃物填料SBBR工艺处理腌渍废水最佳运行工况的研究 被引量:1

Study on the Treatment of Pickle Wastewater Using SBBR Process with Polypropylene Waste as Filter
下载PDF
导出
摘要 [目的]探索使用序批式生物膜反应器处理腌渍废水的可行性。[方法]采用一次性聚丙烯废弃物作为填料,应用序批式生物膜反应器(SBBR)工艺处理腌渍废水,测定废水中化学需氧量与盐度的变化。[结果]序批式生物膜反应器在pH为7.1、温度为25~30℃、有机负荷(CODCr)浓度为956 mg/L时,对腌渍废水的化学需氧量和盐度去除率均较高。[结论]序批式生物膜反应器工艺简单,管理方便,适合处理难降解工业废水。 [ Objective] The research aimed to analyze the feasibility using SBBR process for the treatment of pickle wastewater. [ Method ] Taken one - time polypropylene waste as filter, the pickle wastewater was treated using SBBR process. The chemical oxygen demand (COD) and salinity changes were tested in the procedure. [ Result] The results showed that under the optimum experimental conditions such as pH of 7.1, temperature of 25 - 30 ℃, initial CODcr concentration of 956 mg/L, the removal rates of COD and salinity of pickle wastewater were all higher. [Conclusion] SBBR process was simple, convenient for management, and was suitable for the treatment of degradationresistant industrial wastewater.
出处 《安徽农业科学》 CAS 2014年第31期11067-11068,11071,共3页 Journal of Anhui Agricultural Sciences
关键词 序批式生物膜反应器 聚丙烯废弃物 腌渍废水 SBBR Polypropylene waste Pickle wastewater
  • 相关文献

参考文献6

二级参考文献37

共引文献94

同被引文献13

引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部