摘要
用自动跟踪法采集热处理工艺中淬火油烟，将收集油烟的滤芯置于带盖的聚四氟乙烯套筒，用四氯化碳作溶剂进行超声清洗，清洗液移入容量瓶中定容，用红外分光光度法测定油烟含量。在0.0-100 mg／L范围内，标准淬火油质量浓度实测值与与标准值呈良好的线性，相关系数r=0.9996。加标回收率为85.9%-106.2%，相对标准偏差为1.05%-1.92%（n=6），检出限为0.25 mg／m3。该方法灵敏度高，测定结果准确，可用于企业油烟治理效果的验收检测及环保部门对企业淬火油烟排放浓度的监督监测。
Quenching oil fume in the heat treatment process was collected with automatic tracking method. Fiter which collected oil fumes was placed in teflon sleeve with lid. Ultrasonic cleaning was carried out in lab, cleaning liquid was moved in the volumetric flask, then oil content was determined by infrared spectrophotometry. In the range of 0.0-100 mg/L, standard oil concentration detection value was linear with standard value, the correlation coefficient r=0.999 6. The recovery was 85.9%-106.2%, the relative standard deviation was 1.05%-1.92%（n=6）, and the detection limit was 0.25 mg/m3. The method is sensitive and accurate, it can be used for testing the effect of enterprises oil fume control, and environmental protection department supervision and monitoring in enterprises fume emission concentration.
出处
《化学分析计量》
CAS
2014年第5期68-71,共4页
Chemical Analysis And Meterage
关键词
热处理工艺
红外分光光度法
淬火油烟
heat treatment process
infrared spectrophotometry
quenching oil
