期刊文献+

Effect of Boron Mud and CaF_2 on Surface Tension and Density of CaO-SiO_2-B_2O_3 Ternary Slag Systems 被引量:6

Effect of Boron Mud and CaF_2 on Surface Tension and Density of CaO-SiO_2-B_2O_3 Ternary Slag Systems
原文传递
导出
摘要 The effect of boron mud and CaF2,which were used as fluxing agents,on surface tension and density of CaO-SiO2-B2O3 ternary slag systems was investigated.The surface tension and density were measured by using the ring detachment method and Archimedean method,respectively.The results indicated that surface tension and density of the slag systems decreased with increasing temperature in the range of 1380-1480℃.When 5%-10% CaF2 was employed as fluxing agent,the surface tension and density of slag were decreased with increasing CaF2 content,and the surface tension changed from 0.3to 0.6N/m,while the density changed from 3.4to 4.1g/cm3.However,when using 5%-10%boron mud as fluxing agent,the surface tension was enhanced,whereas the density decreased with the increase of boron mud content,and the variation range was 0.4-0.6N/m for surface tension and 3.2-3.9g/cm3 for the density.As a conclusion,using boron mud as fluxing agent to substitute for CaF2 did not cause significant changes in slag surface tension and density. The effect of boron mud and CaF2,which were used as fluxing agents,on surface tension and density of CaO-SiO2-B2O3 ternary slag systems was investigated.The surface tension and density were measured by using the ring detachment method and Archimedean method,respectively.The results indicated that surface tension and density of the slag systems decreased with increasing temperature in the range of 1380-1480℃.When 5%-10% CaF2 was employed as fluxing agent,the surface tension and density of slag were decreased with increasing CaF2 content,and the surface tension changed from 0.3to 0.6N/m,while the density changed from 3.4to 4.1g/cm3.However,when using 5%-10%boron mud as fluxing agent,the surface tension was enhanced,whereas the density decreased with the increase of boron mud content,and the variation range was 0.4-0.6N/m for surface tension and 3.2-3.9g/cm3 for the density.As a conclusion,using boron mud as fluxing agent to substitute for CaF2 did not cause significant changes in slag surface tension and density.
出处 《Journal of Iron and Steel Research International》 SCIE EI CAS CSCD 2014年第8期745-748,共4页
基金 Item Sponsored by National Natural Science Foundation of China(51174099) Natural Science Foundation of Jiangsu Province of China(BK2010355)
关键词 boron mud calcium fluoride surface tension DENSITY boron mud calcium fluoride surface tension density
  • 相关文献

参考文献12

  • 1z. z. Yang, T. Y. Cao , T. Ou , w. Sun, w. J. Zhu, J. Wuhan Eng. Inst. 23 (2011) No.3, 18-22. 被引量:1
  • 2H. Sutio , R. Inoue, lSI] Int. 42 (2002) 921-929. 被引量:1
  • 3G. R. Li, H. M. Wang, Q. X. Dai, Y. T. Zhao, ]. S. u, J. Iron Steel Res. Int. 14 (2007) No.1, 25-28. 被引量:1
  • 4H. M. Wang, G. R. Li, Q. X. Dai, B. Li, X. J. Zhang, G. M. Shi, Ironmak. Steelmak. 34 (2007) 350-353. 被引量:1
  • 5H. M. Wang, L. L. Yang, G. R. Li, X. Zhu, J. Iron Steel Res. Int. 20 (2013) No.6, 21-24. 被引量:1
  • 6M. Hanao , T. Tanaka, M. Kawamoto, K. Takatani, lSI] Int. 47 (2007) 935-939. 被引量:1
  • 7Y. W. Mao, Metallurgical Melt, Metallurgical Industry Press, Beijing, 1994. 被引量:1
  • 8H. M. Wang, T. W. Zhang, H. Zhu, G. R. u. Y. Q. Yan, lSI] Int. 51 (2011) 702-707. 被引量:1
  • 9J. H. Chi, Y. N. Gan , Mould Powder, Northeastern University Press, Shenyang, 1992. 被引量:1
  • 10M. Nakamoto, T. Tanaka, L. Holappa , H. Marko, lSI] Int. 47 (2007) 211-216. 被引量:1

同被引文献26

引证文献6

二级引证文献10

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部