摘要
分析了某制革废水水质及原有处理系统运行过程中存在的问题,在充分利用原有设施的前提下,设计合理的改造工艺。结果表明:改造后的处理系统对COD、BOD5、NH3-N、SS的去除率分别为98.3%、99.4%、97.0%、98.9%,出水pH在7.0左右,出水水质达到了《污水综合排放标准》(GB 8978—1996)一级标准要求。
The wastewater quality of tannery wastewater and the existing problems in the operation courses of the original treatment system have been analyzed. By making sufficient use of the original equipments,a reasonable process modification has been designed. The results show that after the treatment system has been modified ,the removing rates of COD, BOD5, NHs-N and SS are 98.3%, 99.4%, 97.0% and 98.9%, respectively. Furthermore, the effluent pH is about 7.0,the effluent water quality reaches the first class of criteria specified in the Integrated Wastewater Discharge Standard （GB 8978- 1996）.
出处
《工业水处理》
CAS
CSCD
北大核心
2014年第8期87-89,共3页
Industrial Water Treatment
关键词
制革废水
水解酸化
A
O
曝气生物滤池
深度处理
tannery wastewater
hydrolysis acidification
anoxic-oxic
biological aerated filter
advanced treatment
