摘要
为了研究吹填软土在侧向变形条件下的力学与结构特性,利用真三轴试验机以及WF应力路径试验仪进行了不排水条件下的侧向卸荷试验,并与常规三轴试验结果进行了对比分析。试验结果表明:与常规三轴剪切试验应力应变关系曲线表现的硬化特性不同,真三轴卸荷试验表现出应变软化现象。随着初始围压的增大,土体由剪缩向剪胀变化。由于中主应力的影响,真三轴卸荷状态下土体的结构屈服应力值明显大于WF卸荷状态以及常规三轴试验下的数值,其随着中主应力系数bd的增大而成非线性增长。真三轴侧向卸荷条件下土体抗剪强度指标大于WF卸荷条件,与常规三轴试验结果也明显不同,其内摩擦角增大,粘聚力减小。
In order to study the mechanical properties and structural properties of soft dredger fill under lateral deformation. Based on true triaxial and WF stress path apparatus, lateral unloading undrained tests were carried out. The results derived from true triaxial test, WF stress path test and routine triaxial shear test were analyzed. The contrastive conclusions are as follows. The stress-strain curve of true triaxial unloading test shows a softening behavior, which is different from the hardening behavior for that of conventional triaxial shear test. With the increase of initial confined pressure, the dilatancy of soil transfers from shrinkage to expansion. The structural yield stress of the unloading soil with true triaxial test method is dramatically larger than that with the latter two tests due to the effect of intermediate principal, which exhibits a nonlinear growth as the coefficient of intermediate principal bd stress jumps. The shear strength indexes of unloading soil with true triaxial test is larger than that with WF stress path test. Compared with the results of routine triaxial test, the internal friction angle of true triaxial test is bigger while the cohesion is smaller.
出处
《土木建筑与环境工程》
CSCD
北大核心
2014年第4期81-86,共6页
Journal of Civil,Architectural & Environment Engineering
基金
国家自然科学基金(41372291
51179186)
关键词
侧向变形
结构特性
真三轴
吹填软土
卸荷
中主应力
lateral deformation
structural properties
true triaxial test
soft dredger fill
unloading
theintermediate principal stress
