摘要
采用双锥混合器和立式高速搅拌混合器进行钨粉配炭,研究了双锥混合+搅拌混合配炭新工艺各项参数对W+C混合料质量的影响,用极差分析法对W+C混合料碳量分布均匀性进行分析。结果表明,采用双锥混合+搅拌混合新工艺生产的W+C混合料碳量均匀性优于传统的球磨混合工艺。双锥混合器运转速度12r/min时,填充率50%和混合时间5h,双锥正、反向交替运转,搅拌混合4min可生产碳量均匀性好的W+C混合料。
Tungsten powder was mixing with carbon by double cone mixer and vertical high speed mixer, the effects of parameters of the new carbon addition process by double cone mixing and stirring mixing on the quality of W+C mixture were studied,and the uniformity of carbon distribution in W+C mixture was analyzed by range analysis.The results show that the uniformity of carbon distribution of W+C mixture produced by double cone mixing and stirring mixing process is better than that of traditional ball milling mixing process.The W+C mixture with good carbon uniformity can be produced under the conditions of 12 r/min operating velocity,50% filling rate,5hmixing time,alternating operation from positive to negative direction,and 4min stir mixing time.
作者
谢勇才
余碧荷
XIE Yong-cai;YU Bi-he(Zigong Cemented Carbide Co.,Ltd,Zigong 643011,China)
出处
《稀有金属与硬质合金》
CAS
CSCD
北大核心
2018年第6期93-96,共4页
Rare Metals and Cemented Carbides
关键词
双锥混合
搅拌混合
配炭工艺
钨粉
炭黑
碳量分布均匀性
double cone mixing
stirring mixing
carbon addition
tungsten powder
carbon
the uniformity of carbon distribution
