摘要
陶瓷电窑炉升温曲线数值模拟方法直接影响电窑炉烧制陶瓷的温度、时间和消耗能量等过程。针对当前方法忽略了温度对烧制陶瓷的质量和能源消耗影响,导致最终获得电窑炉烧制的陶瓷不结实有裂纹等问题,提出一种基于离散坐标法的电窑炉升温曲线数值模拟方法,利用电窑炉烧制陶瓷的时间、内部径向和轴向的长度、烧制温度和密度等条件,对陶瓷电窑炉升温曲线的二维非稳态传热做离散处理并对其进行建模,进一步分析电窑炉烧制陶瓷时内部温度梯与气体密度的变化,采用瑞利数度量对烧制时产生气体的温度流动现象进行浮力诱导并对其进行计算,判断出烧制陶瓷的气体升温后是否存在流动状态,采用离散坐标法解决陶瓷电窑炉升温曲线的辐射问题,仿真结果表明,提出的方法能够提高陶瓷烧制的质量和生产率,并且能够降低陶瓷烧制产生的能耗,为今后陶瓷业的发展奠定基础,并起到重要作用。
A numerical simulation method for temperature-rising curve of electric kiln based on discrete coordinate method was presented.The firing time of electric kiln,the internal radial length and internal axial length,the firing temperature and the density were used to disperse and model the two-dimensional unsteady state heat transfer of temperature-rise curve of ceramic electric kiln,so as to further analyze the changes of the internal temperature gradient and gas density in firing ceramics.Moreover,the Rayleigh number metric was used to perform the buoyancy guidance on the temperature flowing phenomenon of gas in firing ceramics,and then it was calculated to judge whether there was a flow state after the gas temperature rose.Finally,the discrete coordinate method was used to solve the radiation problem of temperature-rising curve of ceramic electric kiln.From simulation results,we can see that the proposed method can improve the quality and productivity of ceramic firing.Meanwhile,it can reduce the energy consumption of ceramic firing,which lays the foundation and plays an important role for future development of ceramic industry.
作者
彭晓辉
PENG Xiao-hui(School of Fine Arts,Jianghan University,Wuhan Hubei 430056,China)
出处
《计算机仿真》
北大核心
2018年第12期191-194,共4页
Computer Simulation
关键词
陶瓷电窑炉
升温
曲线
数值模拟
Ceramic electric kiln
Temperature rise
Curve
Numerical simulation
