摘要
研究了变形参数对Ti 15 3合金热变形后晶粒轴比的影响 ,并采用人工神经网络方法建立了其晶粒轴比与变形程度、变形速率和变形温度之间的数学模型。将此模型与热力耦合刚粘塑性有限元方法相结合 ,对Ti 15 3合金热反挤成型过程的晶粒轴比场进行数值模拟和相应实验研究 ,结果表明 ,预测值与实测值吻合较好。
The effect of processing parameters on the grain axial ratio of Ti 15 3 was studied and the predicting model for the relation between grain axial ratio and strain, strain rate and temperature for Ti 15 3 alloy was developed by an artificial neural network method.This model was incorporated into rigid viscoplastic thermo coupled finite element method and the hot back extrusion process of Ti 15 3 alloy was simulated. Corresponding experimental research was performed.The coincidence of the predicted results with measured ones shows that the method is able to successfully predict the grain axial ratio of Ti 15 3 alloy after hot deformation.
出处
《中国有色金属学报》
EI
CAS
CSCD
北大核心
2002年第1期92-95,共4页
The Chinese Journal of Nonferrous Metals
