期刊文献+

粘性不可压缩三维流场分块算法研究 被引量:1

Domain decomposition and matched method study of three-dimensional incompressible viscous flows
下载PDF
导出
摘要 提出了重叠对接耦合分块方法即为隐式求解的块迭代方法 .采用自主开发的三维粘性不可压缩流场计算程序对重叠对接与不重叠对接的流场分块求解方法进行了比较研究 .并与他人的实验结果进行了比较 ,符合很好 .研究表明 ,两种算法均能获得收敛解 。 The domain decomposition method with overlapping grid is presented in this paper as implicit iterative method in algebra systems. A contrastive numerical simulation of three\|dimensional incompressible viscous flows was carried out using our own code with overlapping and non\|overlapping grids,respectively. The results compared well with experiment results in reference\.The research indicated that the convergent results can be reached for the case of two domain decomposition methods; and that the convergence calculated from the domain decomposition method with overlapping grids is better than calculated by the non\|overlapping grid method.
出处 《浙江大学学报(工学版)》 EI CAS CSCD 北大核心 2002年第1期111-114,共4页 Journal of Zhejiang University:Engineering Science
基金 国家自然科学基金资助项目 ( 19972 0 6 1)
关键词 区域分解法 粘性不可压缩流 数值模拟 收敛解 重叠对接分块法 流场计算 domain decomposition method incompressible viscous flow numerical simulation
  • 相关文献

参考文献3

二级参考文献2

  • 1朱国林,空气动力学学报,1994年,12卷,2期,153页 被引量:1
  • 2苏铭德,水动力学研究与进展.A,1993年,增刊 被引量:1

共引文献15

同被引文献14

  • 1冯彦洪,瞿金平,刘斌,何和智,晋刚,邹新良.振动力场作用下单螺杆塑化熔融过程数值模拟[J].华南理工大学学报(自然科学版),2006,34(9):104-110. 被引量:2
  • 2MACKERLE J.Finite element analysis and simulation of polymers-an addendum:A bibliography (1996-2002)[J].Modelling and Simulation in Materials Science and Engineering,2003,11(2):195-231. 被引量:1
  • 3BOGAERDS A C B,VERBEETEN W M H,PETERS G W M,et al.3D viscoelastic analysis of a polymer solution in a complex flow[J].Computer Methods in Applied Mechanics and Engineering,1999,180(3):413-430. 被引量:1
  • 4WILCZY(N)SKI K,TYSZKIEWICZ A,SZYMANIAK Z.Modeling for morphology development during singlescrew extrusion of LDPE/PS blend[J].Journal of Materials Processing Technology,2001,109(3):320-323. 被引量:1
  • 5YAMAGUCHI H,ZHANG Xinrong,MATSUMOTO T.Flow pattern variations of viscoelastic fluid flows in three dimensional branching channel[J].Polymer Engineering & Science,2010,50(1):32-42. 被引量:1
  • 6BOGAERDS A C B,HULSEN M A,PETERS G W M,et al.Stability analysis of injection molding flows[J].Journal of Rheology,2004,48(4):765-785. 被引量:1
  • 7LI Lingfeng,MEKID S.Resin velocity and temperature in screw processing[J].Polymer-Plastics Technology & Engineering,2008,47(11):1162-1169. 被引量:1
  • 8SASTROHARTONO T,JALURIA Y,ESSEGHIRS M,et al.A numerical and experimental study of threedimensional transport in the channel of an extruder for polymeric materials[J].Int.J.Heat Mass Transfer,1995,38(11):1957-1973. 被引量:1
  • 9吴海宏,赵振峰,申长雨.聚合物注塑内应力计算的蠕变模型[J].机械工程学报,2008,44(12):221-225. 被引量:8
  • 10陈晋南,王鸳鸯,彭炯.螺杆转速和机筒温度对加工聚丙烯的影响[J].北京理工大学学报,2010,30(1):109-113. 被引量:7

引证文献1

二级引证文献15

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部