期刊文献+

Effect of copper, sulfur, arsenic and antimony on silver distribution in phases of lead blast furnace

铅鼓风炉中铜、硫、砷和锑对银分布的影响(英文)
下载PDF
导出
摘要 An experimental study was carried out to estimate the effect of the lead impurities on the silver distribution in the phases formed in the lead blast furnace. Samples of sinter with different contents of Cu, S, As and Sb were equilibrated under reducing atmosphere (p(CO)/p(CO2)=2.45) at 1573 K in a tube furnace and slowly cooled. The samples were characterized by scanning electron microscopy and microanalysis (SEM-EDS). There were five immiscible phases:slag (CaO, FeO and SiO2), matte (S, Cu and Fe), speiss (As, Fe and Cu), Cu-Sb phase and lead bullion (Pb, Ag, Sb, Cu, etc). The results showed that Cu and Sb promote silver losses during the process since they form a liquid solution with higher silver solubility than liquid bullion. Sulfur and arsenic react with copper to form the matte and speiss phases, respectively. The effect of S and As is to reduce the amount of Cu-Sb alloy and then the silver losses from the bullion. 研究铅鼓风炉中杂质对银分布的影响。将含有不同Cu、S、As和Sb含量的铅烧结块在管式炉中于1573K下进行烧结,然后随炉冷却。烧结气氛为还原性的CO+CO2气体(p(CO)/p(CO2)=2.45)。采用SEM-EDS对所得样品进行表征。结果表明:烧结样品中含有5种不互溶的相,即炉渣(CaO,FeO,SiO2)、冰铜(S,Cu,Fe)、硬渣(As,Fe,Cu)、Cu-Sb相和铅块。银在Cu与Sb形成的熔体中的溶解度比在液态铅中的高。S与Cu形成冰铜,As与Cu形成硬渣。S和As能减少Cu-Sb合金的生成量,从而降低铅块中银的损失。
出处 《Transactions of Nonferrous Metals Society of China》 SCIE EI CAS CSCD 2014年第4期1202-1209,共8页 中国有色金属学报(英文版)
基金 Servicios Administrativos Peoles S.A. de C.V. for providing financial support for this project
关键词 lead blast furnace SILVER lead impurities 铅鼓风炉 铅杂质
  • 相关文献

参考文献13

  • 1ZHAO B, ERRINGTON B, JAK E, HAYES P. Gaseous reduction of isasmelt lead slag and lead blast furnace [C]//Lead and Zinc 2008. Johannesburg: The Southern African Institute of Mining and Metallurgy, 2008: 133-146. 被引量:1
  • 2KING M, RAMACHANDRAN V, PRENGAMAN R D, DEVITO S C. Lead and lead alloys [M]. New York: Kirk-Othmer Encyclopedia of Chemical Technology, 2005: 60. 被引量:1
  • 3CALEY W F, WHITEWAY S G, NElL A B, DUG-DALE P J. Viscometer for lead blast furnace slags [C]//14th Annual Conference of Metallurgists. Toronto: Canada Institute of Metallurgy, 1975:113. 被引量:1
  • 4HABASHI F. Handbook of extractive metallurgy. Primary metals, secondary metals, light metals [M]. New York: Wiley-VCH, 1997: 2379. 被引量:1
  • 5谭鹏夫.Thermodynamic modeling of lead blast furnace[J].中国有色金属学会会刊:英文版,2005,15(1):160-164. 被引量:2
  • 6CHAO J T, DUGDALE P J, MORRIS D R, STEWARD F R. Gas composition, temperature and pressure measurements in lead blast furnace [J]. Metall Trans B, 1978, 9: 293-300. 被引量:1
  • 7MORRIS D R, AMERO B R, EVANS P G, PETRUK W, OWENS D R. Reactions of sinter in a lead blast furnace [J]. Metall Trans B, 1983, 14: 617-623. 被引量:1
  • 8PEREZ-LABRA M, ROMERO-SERRANO A, HERNANDEZ- RAMIREZ A, ALMAGUER-GUZMAN I, BENAVIDES-PEREZ R. Distribution of lead and silver under lead blast furnace conditions [J]. Revista de Metalurgia de Madrid, 2012, 48(3): 213-222. 被引量:1
  • 9CALVO F A, BALLESTER A. Lead ore reduction: Metal losses in the slag [J]. Quimica e Industria, 1984, 30(9): 557-562. 被引量:1
  • 10CALVO F A, BALLESTER A. Lead losses in the slag of a reduction melting furnace. Effect of the slag composition [J]. Anales de Quimica, 1987, 83: 397-406. 被引量:1

二级参考文献11

  • 1TAN Peng-fu,Neuschuetz D.A thermodynamic model of nickel smelting and direct high-grade nickel matte smelting processes-Model development and validation[J]. Metallurgical and Materials Transactions B,2001,32B:341-352. 被引量:1
  • 2TAN Peng-fu,Neuschuetz D.A thermodynamic model of nickel smelting and direct high-grade nickel matte smelting processes-Distribution behaviors of Ni,Cu,Co,Fe,As,Sb and Bi[J].Metallurgical and Materials Transactions B,2001,32B:353-362. 被引量:1
  • 3TAN Peng-fu,ZHANG Chuan-fu.Modeling of accessory element distribution in copper smelting process[J]. Scandinavian Journal of Metallurgy,1997,26(3):115-122. 被引量:1
  • 4TAN Peng-fu,ZHANG Chuan-fu. Thermodynamic modeling for direct lead processes [A]. Mishra B.EPD Congress 1998[C].San Antonio,Texas:The Minerals,Metals and Materials Society (TMS).1998.815-820. 被引量:1
  • 5TAN Peng-fu,Hurtado I,Neuschuetz D,et al.Thermodynamic modeling of PCDD/Fs formation in thermal processes[J].Environmental Science and Technology,2001,35(9):1867-1874. 被引量:1
  • 6TAN Peng-fu.Modeling and Control of Dioxin Formation During Iron Ore Sintering Operations[M].Duesseldorf:VDI Verlag,2002. 被引量:1
  • 7Chao J T,Dugdale P J,Morris D R,et al.Gas composition,temperature and pressure measurements in a lead blast furnace[J].Metallurgical Transactions B,1978,9B:293-300. 被引量:1
  • 8Cowperthwaite J E,Dugdale P J,Landry C J F,et al.Energy aspects of a lead blast furnace[J].Metallurgical Transactions B,1980,11B:291-299. 被引量:1
  • 9Chao J T.A dynamic simulation of a lead blast furnace[J].Metallurgical Transactions B,1981,12B:385-402. 被引量:1
  • 10Hussain M M,Morris D R.Mathematical model of the stack region of a commercial lead blast furnace[J].Metallurgical Transactions B,1989,20B:97-106. 被引量:1

共引文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部