摘要
基于齿轮传动线外啮出冲击原理,提出在啮合线方向上构建含系统等效误差和齿对综合变形的啮出冲击计算模型.根据齿轮变形随载荷变化的曲线推导出线外啮出冲击点的综合变形.将系统等效误差与齿对综合变形沿啮合线方向进行合成,求出线外啮出点与冲击点的位置.根据啮合点法向速度相等原理,求解线外啮出过程中被动齿轮最小转速和啮出冲击速度,进而求解出线外啮出冲击力.结果表明：线外啮出冲击力为啮入冲击力的70%~80%.即啮出冲击对齿轮传动较啮入冲击的影响要小,验证了啮出冲击和啮入冲击对＂啮合合成基节误差＂具有不同的作用效果.
Based on the mechanism analysis of impact of mesh-out at corner contact in gear transmission,a calculation model including system equivalent error and teeth synthetic deformation was established on the line of meshing.The synthetic deformation of the point in mesh-out beyond the normal path was reversed,on basis of meshing theory and the curve of gear deformation and load-history.By combining the system equivalent error with the teeth synthetic deformation,the point of mesh-out at corner contact and the impacting point were determined.Given uniform normal velocity at meshing points,the minimum rotation speed of the driven gear in mesh-out at corner contact and the impact velocity were solved. And then the impact force of mesh-out at corner contact was confirmed.The example calculation shows that,the impact force of mesh-out at corner contact is 70%to 80% of that of mesh-in at corner contact;namely,the impact of mesh-out is smaller than that of mesh-in. It verifies that impact in mesh-out and mesh-in has a different effect on＂mesh synthetic base pitch error＂.
出处
《航空动力学报》
EI
CAS
CSCD
北大核心
2014年第5期1205-1210,共6页
Journal of Aerospace Power
基金
国家自然科学基金(51275160)
国家重点基础研究发展计划(2010CB832700)
关键词
齿轮传动
系统等效误差
齿对综合变形
线外啮合
啮出冲击
gear transmission
system equivalent error
teeth synthetic deformation
mesh-out at corner contact
impact of mesh-out
