摘要
针对深海钻机的使用环境,设计并实现了甲板实时操作钻机的一款手操器。该手操器由基于STM32F103VCT6微控制器的控制板以及一些外部输入输出设备所组成,其与钻机系统通过串口通信。由于甲板手操器与海底钻机距离较长,且串口传输距离有限,因此以光纤传输为中继。
Aiming at the operating environment of the deep water drilling rig, a manual operater of real-time on-deck operation has been realized. This manual operator is composed of a control panel based on the STM32FVCT106 MCU and some external input and output devices. Serial communication is applied between the manual operator and its rig system. Considering the long distance between the manual operator on the deck and the drilling rig on the sea floor, as well as the limited transmitting distance of serial port, optical fiber transmission is used as a relay.
出处
《微型机与应用》
2014年第5期30-32,36,共4页
Microcomputer & Its Applications
基金
国际海底区域研究开发"十一五"项目课题(DYXM-115-03-09-01)
关键词
深海钻机系统
手操器
STM32
串口通信
光纤传输
deep-sea drilling system
hand-controler
serial communication
optical fiber transmission
