摘要
为减少夜间小区路灯恒照度照明的耗电量,设计了基于单片机的小区路灯节能控制系统,该系统主要由AVR单片机ATmega16、环境亮度检测模块、红外感知模块、实时时钟模块、数码管显示模块、调光以及恒流输出模块等组成。系统通过环境亮度模块检测并自动控制路灯的开/关,夜间启用红外传感模块,根据红外检测的信号经单片机处理,再通过调光电路调节路灯的端电压,从而实现路灯控制系统的动态节能。此系统实际上模拟的小区路灯控制系统,如果应用到实际场景中存在一些由模拟到实际的转换问题,本系统在一定程度上实现了路灯的节能控制。且在节能的理念和设计可以为未来路灯节能的控制系统提供一定的借鉴意义。
To reduce the power of lamp community constant illumination lighting at night,designed street lamp energy- saving control system based on single chip microcomputer. This system is mainly composed of AVR microcontroller ATmegalf,environmental brightness detection module, infrared sensing module, real-time clock module, LED display module, dimming and constant current output modules and so on. The environmental brightness detected and automaticly controled lamp switch,night infrared sensor module is enabled, the microcontroller according to the signal processed by the infrared detector, and through the dimming circuit to control the terminal voltage of lambs, then achieved dynamic energy saving of street lamb control system. This system actually simulate street lamb control system, if applied to the actual scene, there are some problems by the Simulation to the actual conversion. The system achieved energy-saving of lambs control to a certain degree, and energy-saving ideas and design for the future street lambs energy saving control system provides a certain significance.
出处
《电子测量技术》
2014年第4期92-95,共4页
Electronic Measurement Technology
关键词
单片机
路灯
调光控制
动态节能
SCM
street lamb
The light control
dynamic energy
