期刊文献+

针铁矿法沉铁过程的混杂建模与控制 被引量:10

Hybrid modeling and control of iron precipitation by goethite process
下载PDF
导出
摘要 由于针铁矿法沉铁过程铁离子浓度和pH值难以控制,提出一种基于混杂系统理论沉铁过程的建模与控制方法。在深入分析沉铁过程物理化学反应机理的基础上,采用物料平衡原理,建立基于连续搅拌釜的数学模型。针对溶液中Fe2+浓度对氧气有效溶解浓度的影响,建立Fe2+浓度不同波动区间内有效溶解氧浓度切换模型。采用公共李亚普诺夫函数的方法,给出基于溶液中Fe2+浓度和有效溶解氧浓度的沉铁系统切换控制器的设计方法。仿真结果表明:混杂建模与控制方法能反映沉铁过程各离子浓度的动态变化,满足工艺指标。 A modeling and control method based on hybrid theory was proposed due to controlling the iron ion concentration and pH value difficultly in iron precipitation by goethite process. A mathematical model of iron precipitation by goethite process was built based on the physical and chemical reaction mechanism of iron precipitation and material balance principle. An effective concentration of dissolved oxygen in different interval of Fe2+concentration model was constructed by analyzing the effects of Fe2+ concentration on dissolved oxygen in solution. The switching controller of the iron precipitation system was designed based on Fe2+ concentration and effective concentration of dissolved oxygen by using common Lyapunov function technique. The simulation results show that this modeling and control method is effective to reflect the dynamic changes of ion concentrations during precipitation of iron, which meets the process indexes.
出处 《中国有色金属学报》 EI CAS CSCD 北大核心 2014年第1期254-261,共8页 The Chinese Journal of Nonferrous Metals
基金 国家自然科学基金资助项目(61273186) 中南大学研究生自主探索创新基金资助项目(2013zzts217) 国家创新研究群体科学基金资助项目(61321003)
关键词 针铁矿法 沉铁 混杂模型 切换控制器 iron precipitation goethite process hybrid model switching controller
  • 相关文献

参考文献18

  • 1陈家墉,于淑秋,伍志春.湿法冶金中铁的分离与利用[M].北京:冶金工业出版社,1991.229. 被引量:3
  • 2MATTOS A G, PINTO J C. Steady-state modeling of slurry and bulk propylene polymerizations[J]. Chemical Engineering Science, 2001, 56(13): 4043-4057. 被引量:1
  • 3SVANDOVA Z, KOTORA M, MARKOS J, JELEMENSKY L. Dynamic behaviour of a CSTR with reactive distillation[J]. Chemical Engineering Journal, 2006, 119(2/3): 113-120. 被引量:1
  • 4JONESA P N, OCAN-TASK1N N G, YIANNESKIS M. The use of momentum ratio to evaluate the performance of CSTRs[J]. Chemical Engineering Research and Design, 2009, 87(4):485-491. 被引量:1
  • 5邓燕妮,桂卫华,阳春华,谢永芳.氧化铝碳酸化分解动态过程建模及非线性分析[J].中国有色金属学报,2008,18(9):1736-1741. 被引量:7
  • 6SLAVA J, SVANDOVA Z, MARKO J. Modelling of reactive separations including fast chemical reactions in CSTR[J]. Chemical Engineering Journal, 2008, 139(3): 517-522. 被引量:1
  • 7王凌云..湿法炼锌净化过程建模及基于控制参数化的优化方法[D].中南大学,2009:
  • 8程代展,郭宇骞.切换系统进展[J].控制理论与应用,2005,22(6):954-960. 被引量:57
  • 9BALDI S, BATTISTELLI G, MOSCA E, TESI P. Multi-model unfalsified adaptive switching supervisory control[J]. Automatica, 2010, 46(2): 249-259. 被引量:1
  • 10BALDI S, IOANNOU P, MOSCA E. Multiple model adaptive control with mixing: The discrete-time ease[J]. IEEE Transactions on Automatic Control, 2012, 57(4): 1040-1045. 被引量:1

二级参考文献101

共引文献91

同被引文献169

引证文献10

二级引证文献40

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部