期刊文献+

共沉淀法制多孔类球型钛酸锂及电性能研究 被引量:2

Synthesis Of Porous Sphere-like Li_4Ti_5O_(12) By Co-precipitation Method And Study On Its Performances
下载PDF
导出
摘要 用NH4HCO3为起泡剂共沉淀法成功的合成出一种多孔类球形钛酸锂,并对它的结构及电化学性能进行了研究。经测试表明合成出的Li4Ti5O12振实密度达到1.68 g/cm3,采用XRD粉末衍射测试表明产物为纯相尖晶石型Li4Ti5O12,扫描电镜表明产物为平均尺寸为2~5μmd的多孔的类球体结构。在1.0~3.0 V下充放电0.1 C、1 C、1.5 C、2 C、3 C倍率下首次放电容量分别为176.4、151.6、143.8、138.5 mAh/g。 Porous sphere-like Li4Ti5O12 was successfully synthesized according to a co-precipitation method using NH4HCO3 as pore forming agent. The structure and electrochemical of Li4Ti5O12 were investigated. It showed that the tap-density of Li4Ti5O12 was 1. 68g/cm3. The X-ray diffraction demonstrated that Li4Ti5O12 synthesized was pure spinel-type Li4Ti5O12. The SEM indicated the average particle size of porous microsphere was 2 ~ 5 μm. Between 1. 0V and 3. 0V versus Li the initial discharge specific capacity were 176. 4,151. 6,143. 8,138. 5 mAh / g at the 0. 1 C,1 C, 1. 5 C,2 C,3 C rates,respectively.
出处 《广州化工》 CAS 2014年第1期3-5,共3页 GuangZhou Chemical Industry
基金 国家自然科学基金项目(No:51372125)
关键词 锂离子电池 LI4TI5O12 电化学性能 形貌控制 Li ion battery Li4Ti5O12 electrochemical performance morphology control
  • 相关文献

参考文献21

  • 1T.Ohzuku,A.Ueda,N.Yamamoto. Zero-strain insertion material of Li[Li1/3 Ti5/3]O4 for rechargeable lithium Cells[J].Journal of the Electrochemical Society,1995,(05):1431-1435. 被引量:1
  • 2S.Scharner,W.Weppner,P.Schmid-Beurmann. Evidence of twophase formation upon lithium insertion into the Li1.33 Ti1.67 O4 spinel[J].Journal of the Electrochemical Society,1999,(03):857-861. 被引量:1
  • 3K.Zaghib,M.Simoneau,M.Armand. Electrochemical study of Li4Ti5O12 as negative electrode for Li-ion polymer rechargeable batteries[J].Journal of Power Sources,1999.300-305. 被引量:1
  • 4L.Cheng,X.L.Li,H.J.Liu. Carbon-coated Li4Ti5O12 as a high rate electrode material for Li-ion intercalation[J].Journal of the Electrochemical Society,2007,(07):692-697. 被引量:1
  • 5N.Zhu,W.Liu,M.Xue. Graphene as a conductive additive to enhance the high-rate capabilities of electrospun Li4Ti5O12 for lithium-ion batteries[J].Electrochimica Acta,2010,(20):5813-5818. 被引量:1
  • 6S.Takai,M.Kamata,S.Fujiine. Diffusion coefficient measurement of lithium ion in sintered Li1.33 Ti1.67 O4 by means of neutron radiography[J].Solid State Ionics,1999,(1-4):165-172. 被引量:1
  • 7C.Jiang,M.Ichihara,I.Honma. Effect of particle dispersion on high rate performance of nano-sized Li4Ti5O12 anode[J].Electrochimica Acta,2007,(23):6470-6475. 被引量:1
  • 8X.Li,M.Z.Qu,Z.L.Yu. Structural and electrochemical performances of Li4Ti5-x ZrxO12 as anode material for lithium-ion batteries[J].Journal of Alloys and Compounds,2009,(1-2):L12-L17. 被引量:1
  • 9L.Cheng,J.Yan,G.N.Zhu. General synthesis of carbon-coated nanostructurc Li4Ti5O12 as a high rate electrode material for Li-ion intercalation[J].Journal of Materials Chemistry,2010,(03):595-602. 被引量:1
  • 10E.M.Sorensen,S.J.Barry,H.K.Jung. Three-dimensionally ordered macroporous Li4Ti5O12:Effect of wall structure on electrochemical properties[J].Chemistry of Materials,2006,(02):482-489. 被引量:1

同被引文献16

引证文献2

二级引证文献3

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部