期刊文献+

环冷机磁流变液密封研究 被引量:2

Research on magnetorheological fluid seal of circular cooler
下载PDF
导出
摘要 考虑到环冷机普遍存在着严重漏风问题,依据磁流变液在外加磁场作用下能呈现出可调的流变特性和可控的屈服应力这一特性,将磁流变液密封技术应用于环冷机,以达到有效解决环冷机漏风的目的。将磁流变液看作Bingham流体,建立磁流变液磁场力和屈服应力数学函数表达式,通过有限元分析,研究非磁性密封槽内的磁流变液在外加磁场力作用下流变和屈服特性,仿真结果表明磁流变液在磁场中具有一定的耐压能力,可平衡环冷机内外压差,起到密封作用,并且非磁性隔板边界处磁流变液屈服应力随密封间隙的增大而减小,同时采用线性拟合方法得到了磁流变液屈服应力表达式以计算非磁性隔板移动所需拉力。在此基础上,通过实验验证了有限元仿真结果的正确性,即采用磁流变液密封的方法可有效地解决环冷机漏风问题。 A new magnetorheological fluid seal technique is developed to deal with the air leakage of circular cooler by considering the serious air leakage of circular cooler based on the adjustable rheological property and controllable yield stress of magnetorheological fluid under external magnetic field.The magnetorheological fluid is regarded as Bingham fluid.Its mathematical functions of magnetic force and yield stress are established.Its flow and yield characteristics in nonmagnetic seal groove under magnetic field is studied using finite element method.The simulation results show that 1. the magnetorheological fluid with good sealing performance presents certain pressure resistance under magnetic field,which can equilibrate the internal-external pressure difference of circular cooler;2. the yield stress of magnetorheological fluid at the boundaries of nonmagnetic separator decreases with the increasing of sealing gap.Meanwhile,the linear fit method is proposed to obtain the yield stress expressions according to which the pulling force values The experimental results also prove the accuracy of numerical results with finite element method,It implies that the air leakage of circular cooler can be solved effectively using the developed technique.
出处 《燕山大学学报》 CAS 2013年第6期513-521,共9页 Journal of Yanshan University
基金 国家自然科学基金资助项目(51074141)
关键词 环冷机 磁流变液密封 磁场力 屈服应力 circular cooler magnetorheological fluid seal magnetic force yield stress
  • 相关文献

参考文献20

  • 1汪用澎;张信.大型烧结设备[M]{H}北京:机械工业出版社,1997196-227. 被引量:1
  • 2曾琦..环式冷却机冷却功效数值分析与漏见率测试方法研究[D].中南大学,2010:
  • 3陈东风,王军,路要通.球团环冷机水密封的改造[J].河南冶金,2009,17(6):35-37. 被引量:4
  • 4刘三军,苏震,张卫亮,霍玉英.安钢烧结环冷机余热回收发电技术[J].冶金能源,2009,28(6):40-43. 被引量:12
  • 5吕子祥,王飞,房洪杰.泰钢180m^2烧结环冷机废气余热发电设计方案[J].山东冶金,2010,32(3):19-20. 被引量:3
  • 6Chen X,Zhu X Q,Xu Z Y. The research of the conductive mechanism and properties of magnetorheological fluids[J].Physi-ca B:Condensed Matter,2013.32-35. 被引量:1
  • 7Song W L,Lee C H,Choi S B. Sliding wear behavior of ma-gnetorheological fluid for brass with and without magnetic field[J].{H}Transactions of Nonferrous Metals Society of China,2013,(02):400-405. 被引量:1
  • 8Omidbeygi F,Hashemabadi S H. Exact solution and CFD simulation of magnetorheological fluid purely tangential flow within an ec-centric annulus[J].{H}International Journal of Mechanical Sciences,2013.26-33. 被引量:1
  • 9Sidpara A,Jain V K. Analysis of forces on the freeform surface in magnetorheological fluid based finishing process[J].Interna-tional Journal of Machine Tools and Manufacture,2013.1-10. 被引量:1
  • 10Serrano R A,Donado F,Rosas E R. Magnetorheological fluid based on submicrometric silica-coated magnetite particles under an oscillatory magnetic field[J].{H}Journal of Magnetism and Magnetic Materials,2013.149-158. 被引量:1

二级参考文献13

共引文献30

同被引文献11

引证文献2

二级引证文献7

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部