摘要
目的探讨减少消毒供应室无纺布包装在灭菌完成后湿包现象发生的方法。方法无纺布包装水分子吸收性差、工作中未在规定时间内移动无纺布包及无菌物品存放区温湿度欠佳等原因造成无纺布包装湿包现象。针对以上问题进行改进，总结减少无纺布包装湿包现象发生的有效方法。结果经过3个多月的改进，在器械包打包过程中，将皱纹纸垫于器械与无纺布之间，且铺一层棉布在灭菌架上，湿包率由原来的7．64％降低至1．04％。结论在器械包打包过程中，将皱纹纸垫于器械与无纺布之间，且铺一层棉布在灭菌架上，能有效预防无纺布包装手术包灭菌后湿包现象的发生。
Objective To explore the method of reducing the phenomenon of wet bag in the no-woven packing after sterilization in the central sterile supply. Methods The phenomenon of wet bag in the no-woven operation packing after sterilization was due to the bad absorption of water molecules in the non-woven packaging, movement the non-woven packaging without the given time and poor temperature and humidity in the storage. The improvements were carried out according to the above problems, and the effective method of reducing the phenomenon of wet bagwas summarized. The no-woven packing in the experimental group was packed by no-woven, and filled up a piece of the crepe paper between the instruments and the non-woven and laid the single deek cotton cloth over the sterilization frame in the packaging process. Results The incidence rate of wet bag was decreased from 7.64% to 1.04% three months after improvement. Conclusions Filling up a piece of the crepe paper between the instruments and the non-woven and laying the single deck cotton cloth over the sterilization frame in the packaging process can effectivelyprevent the phenomenon of wet bag in the no- woven operation packing after sterilization.
出处
《中华现代护理杂志》
2013年第33期4153-4154,共2页
Chinese Journal of Modern Nursing
关键词
灭菌
包装材料
无纺布
湿包
Sterilization
Packing material
No-woven
Wet bag
