期刊文献+

合成氨压缩机级间换热器抑焦技术的研究 被引量:4

Study on Coking Inhibition Technology for the Heat Transfer of Multicompression in Synthetic Ammonia Process
下载PDF
导出
摘要 合成氨工艺过程中多级压缩级间换热器的结焦现象非常普遍,直接影响压缩机的运转效率和生产的正常进行,开发其结焦抑制技术是多级压缩的共性关键问题。本文以贵州开磷集团合成氨公司的压缩工段为例,对级间换热器的结焦现状及影响因素进行了分析。在结合乙烯裂解炉抑焦技术的基础上,展望了适用于合成氨级间换热器的抑焦技术。 In the condensing section of synthetic ammonia process engineering, the efficiency of the heat transfer was reduced by the serious coking phenomenon. The development of coking inhibition technology was the common problem. The main causes for coking were analyzed, through the coking phenomenon in the compression section of Guizhou Kailin (GROUP) Co. , Ltd.. The progresses of coke inhibition technologies in ethylene steam cracking weare reviewed and contrasted. Proper coking inhibition technologies for synthetic ammonia system were put forward.
出处 《广州化工》 CAS 2013年第23期17-19,25,共4页 GuangZhou Chemical Industry
基金 贵州省科技支撑计划工业攻关项目(项目编号:黔科合GY字[2012]3052)
关键词 合成氨 换热器 乙烯裂解炉 结焦抑制 synthetic ammonia heat exchanger ethylene cracking furnace coking inhibition
  • 相关文献

参考文献28

二级参考文献117

共引文献164

同被引文献28

  • 1孔凡贵,张婧元,魏铁锋.裂解炉结焦抑制技术进展[J].乙烯工业,2005,17(3):19-21. 被引量:7
  • 2王家宝.超声波清洗工艺的原理及应用[J].柴油机设计与制造,2006,14(4):36-38. 被引量:16
  • 3Petrone S, Deuis R, Kong F, et al.Catalyzed -Assisted Manufacture of Olefins (CAMOL)* :Year -4 Update on Commercial Furnace Installations [C].AIChE Spring Na- tional Meeting.San Antonio : AIChE, 2010 : 88. 被引量:1
  • 4Petrone S,Chen Yan,Deuis R.Catalyzed-Assisted Manu- facture of Olefins (CAMOL):Realizing Novel Operational Benefits from Furnace Coil Surfaces [C].AIChE Spring National Meeting.New Orleans : AIChE, 2008 : 133. 被引量:1
  • 5LesKane,Stephany Romanow [J]XIydrocarbon Process,2000, 79(4): 121. 被引量:1
  • 6Cheol K S,Seop C A, Hyun C D,et al.Method of on-line Coating Film on the Inner Walls of Reaction Tubes in a Hydrocarbon Pyrolysis Reactor[P].US6514563,2003. 被引量:1
  • 7Alloys Optimize Tube Performance [J].Hydrocarbon Pro- cess, 2001,80(9) : 32-34. 被引量:1
  • 8PETRONE S, DEU1S R L, KONG F W, et al. Catalyzed-assisted manufacture of olefins (CAMOL): year-4 update on commercial furnace installations [C] // AIChE 2010 Spring National Meeting, San Antonio, Texas, March 21-25, 2010. [S.1.]: American Institute of Chemical Engineers, 2010: 88a. 被引量:1
  • 9PETRONE S, CHEN YAN, DEUIS R. Catalyzed-assisted manufacture ofolefins (CAMOL): realizing novel operational benefits from furnace coil surfaces [C]// AIChE 2008 Spring National Meeting, New Orleans, Louisiana, April 6-10, 2008. [S.1.]: American Institute of Chemical Engineers American Institute of Chemical Engineers, 2008: 133c. 被引量:1
  • 10KANG S C, CHOI A S, CHO D H, et al. Method of on-line coating film on the inner walls of the reaction tubes in a hydrocarbon pyrolysis reactor: US6514563 [P]. 2003-0244. 被引量:1

引证文献4

二级引证文献3

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部