期刊文献+

我国首台超临界机组X20CrMoV121钢受热面管状态分析

State Analysis of X20CrMoV121 Steel Used in the First Supercritical Unit in China
原文传递
导出
摘要 为全面了解火电厂X20CrMoV121钢受热面管长期运行后的安全状况,对某电厂X20CrMoV121钢末级过热器管及高温再热器管进行了力学性能测试、显微组织分析及高温持久强度试验。试验结果表明,运行管与原始管相比强度有所下降;沉淀相发生熟化,同时还出现了局部板条特征减弱,板条内出现亚结构,位错密度明显降低,且在亚结构内位错呈定向排列的趋势;高温持久强度仍然高于设计值。综合分析认为,经12万h运行后的X20CrMoV121钢管产生了一定程度的老化,但仍可满足设计工况下安全运行的要求。 In order to comprehensively understand the security situation of heating surface tube made of X20CrMoVI21 steel after long - term operation in thermal power plant, the mechanical performances tests, microstructure analysis and high temperature creep rupture strength tests were carried out on final superheater tube and high temperature reheater tube in a power plant. The results show that compared with original tubes, the strength of operating tubes decreases; when the precipitation phase occurs ripening, the local lath characteristics becomes weak, substructure appears in the martensite laths, the dislocation density obviously declines; and the substructure dislocation has the trend of directional arrangement, but the high temperature creep rupture strength is still higher than the design value. From the comprehensive analysis it is concluded that although the X20CrMoV121 steel tubes have aging phenomenon in some extent after 12000 -hour operation, they still can meet the requirements of safe operation under design conditions.
出处 《电力建设》 2013年第10期97-101,共5页 Electric Power Construction
关键词 X20CrMoV121钢 受热面管 力学性能 显微组织 高温持久强度 状态分析 X20CrMoV121 steel heating surface tube mechanical property microstructure high temperature creep rupture strength state analysis
  • 相关文献

参考文献10

二级参考文献28

  • 1雍岐龙,刘正东,孙新军,曹建春,查小琴,张永.钒微合金钢中碳氮化钒固溶量及化学组成的计算与分析[J].钢铁钒钛,2005,26(2):20-24. 被引量:18
  • 2雍岐龙,吴宝榕,白埃民,李永福.铌微合金钢中碳氮化铌化学组成的计算与分析[J].钢铁研究学报,1990,2(2):37-42. 被引量:22
  • 3范长信.超(超)临界机组新型耐热钢若干问题[C] //火电机组建设质量控制技术论坛论文集.满州里,中国电工程学会活力发电分会:2008. 被引量:1
  • 4Sklenic ka V,Kucharova K,Svoboda M,et al.Long-term creep behavior of 9-12% Cr power plant steels[J].Materials Characterization,2003,51:35-48. 被引量:1
  • 5Abe F.Bainitic and martansitic creep-resistant steels[J].Current Opinion in Solid State and Materials Science,2004(8):305-311. 被引量:1
  • 6Ha ttestrand M,Schwind M,Andren H.Microanalysis of two creep resistant 9-12% chromium steels[J].Materials Science and Engineering,1998,A250:27-36. 被引量:1
  • 7Abe F,Taneikel M,Sawada K.Alloy design of creep resistant 9Cr steel using a dispersion of neon-sized cabinetries[J].International Journal of Pressure Vessels and Piping,2007,844:3-12. 被引量:1
  • 8Dimmler G,Weinert P,Kozeschnik E,et al.Quantification of the Laves phase in advanced 9-12% Cr steels using a standard SEM[J].Materials Characterization,2003,51:341-352. 被引量:1
  • 9Rodak K,Hernas A,Kielbus A.Substructure stability of highly alloyed martens tic steels for power industry[J].Materials Chemistry and Physics,2003,81:483-485. 被引量:1
  • 10Hosoi Y,Wade N,Kunimitsu S,et al.Precipitation behavior of Laves phase and it's effect on toughness of 10Cr-2Mo ferritic-martensitic steel[J].J.Nucl Mater.,1986,461:141-143. 被引量:1

共引文献88

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部