期刊文献+

Water solubility in orthopyroxene: Dependence on temperature and Al content 被引量:1

Water solubility in orthopyroxene: Dependence on temperature and Al content
原文传递
导出
摘要 The water solubility in Al-Fe-Mg orthopyroxene[(Mg,Fe,Al)(Si,Al)O3:XFe=0.1]was investigated as a function of temperature and Al contents.Experiments were performed at 10 kbar with temperatures ranging from 800 to 1200°C under water-saturated conditions.Water contents in the(Mg,Fe)SiO3–H2O–Al2O3system were determined using unpolarized Fourier transform infrared spectroscopy.The present results show that water solubility in Al-bearing orthopyroxene decreases systematically with temperature from approximately 1 weight%at 800°C to 568±58 ppm at 1200°C and increase significantly with increasing Al2O3contents under the same annealing temperature and pressure.Combined with published results on the dependence of hydroxyl solubility on water fugacity and pressure,the present results can be described by the relation20.5OH H O()exp nC A T f1bar solid,R H V P T where A=0.0024±0.0015 ppm/bar0.5,1bar H=103.348±9.768 kJ/mol,andsolid V=9.2±1.1cm3/mol.This equation implies that the incorporation mechanism of water in aluminous orthopyroxene involves the isolated OH groups.Based on the experimentally established solubility model used in this study,it is suggested that water solubility decreases with increasing temperature under typical upper mantle pressure.The predicted temperature dependence of water solubility is in good agreement with the previous experimental observations in Al-bearing orthopyroxene,but the opposite dependence is observed in Al-free systems.Moreover,our estimation of the water solubility in upper-mantle minerals as a function of depth for a typical oceanic geotherm might be of potential importance in interpreting the geophysical observations. The water solubility in A1-Fe-Mg orthopyroxene [(Mg,Fe,A1)(Si,A1)O3: XFe = 0.1] was investigated as a function of temperature and A1 contents. Experiments were performed at 10 kbar with temperatures ranging from 800 to 1200℃ under water-saturated conditions. Water contents in the (Mg,Fe)SiO3-H20-A1203 system were determined using unpolarized Fourier transform infrared spectroscopy. The present results show that water solubility in Al-bearing orthopyroxene decreases systematically with tempera- ture from approximately 1 weight % at 800℃ to 568 ± 58 ppm at 1200℃ and increase significantly with increasing A1203 con- tents under the same annealing temperature and pressure. Combined with published results on the dependence of hydroxyl solu- bility on water fugacity and pressure, the present results can be described by the relation COH =A(T)fn=0.5/H2O exp(△H1bar+△VsolidP/RT),where A = 0.0024 ±0.0015 ppm/bar0.5, △H^1bar = -103.348 ± 9.768 kJ/mol, and △V^solid =9.2 ±1.1cm3/mol. This equation implies that the incorporation mechanism of water in aluminous orthopyroxene involves the isolated OH groups. Based on the experimentally established solubility model used in this study, it is suggested that water solubility decreases with increasing temperature under typical upper mantle pressure. The predicted temperature dependence of water solubility is in good agreement with the previous experimental observations in Al-bearing orthopyroxene, but the opposite dependence is ob- served in Al-free systems. Moreover, our estimation of the water solubility in upper-mantle minerals as a function of depth for a typical oceanic geotherm might be of potential importance in interpreting the geophysical observations.
出处 《Chinese Science Bulletin》 SCIE EI CAS 2013年第32期3895-3902,共8页
基金 supported by the National Natural Science Foundation of China (41074048) the National High-tech R&D Program of China (2012AA061403) the COE-21 Program of ISEI, Okayama University
关键词 溶解度模型 温度范围 水饱和 斜方辉石 傅里叶变换红外光谱法 温度依赖性 AI 实验观测 orthopyroxene, water solubility, infrared spectroscopy, asthenosphere
  • 相关文献

参考文献1

二级参考文献1

共引文献5

同被引文献6

引证文献1

二级引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部