摘要
以Bi(NO)3·5H2O和Fe(NO)3·9H2O为初始原料,KOH、NaOH和LiOH·H2O为矿化剂,乙二醇、浓度为65%～68%硝酸和氨水为辅助试剂,水热合成BiFeO3粉体。X-射线衍射图表明,当采用不同的矿化剂合成样品时,可以得到不同的铋铁系化合物,采用KOH为矿化剂时,更容易得到单相BiFeO3粉体;另外发现不使用辅助剂溶解硝酸铋,不仅容易得到单相BiFeO3粉体样品,而且工艺简单。在此基础上,进一步研究了KOH浓度、反应时间、反应温度和前驱物浓度对合成单相BiFeO3粉体的影响。
Bismuth ferrite （ BiFeO3 ） powders were hydrothermal｜y systhesized by using Bi（NO） 3 · 5H20 and Fe（NO）3 · 9H20 as starting materials, KOH, NaOH and LiOH · H20 used as mineralizers, and ethylene glycol and 65% 68% nitric acid as assistances. X-ray diffraction revealed that various bismuth ferrite powders were obtained by different mineralizer. The experimental results showed that, without dissolving Bi （NO）3 ~ 5H20 in assistance, single-phase BiFeO3 powders were not only easy to be synthesized , but also the operation was simple. The effects of KOH concentration, reaction time, temperature and precursor concentration on synthesizing single-phase BiFeO3 powders were also studied.
出处
《硅酸盐通报》
CAS
CSCD
北大核心
2013年第9期1910-1915,共6页
Bulletin of the Chinese Ceramic Society
基金
海南大学应用科技学院(儋州校区)校基金资助项目(Hyk-1207)
