期刊文献+

Evolution of rheocast microstructure of AZ31 alloy in semisolid state 被引量:5

Evolution of rheocast microstructure of AZ31 alloy in semisolid state
下载PDF
导出
摘要 Semisolid rheoforming (SSR) is a promising technology for the production of Mg wrought alloy in foundry settings. In order to realize SSR, it is necessary to characterize the grain structure evolution during slurry preparation. In this paper, slurry of AZ31 alloy was produced by a novel rheocast process known as self-inoculation method (SIM). Interrupted quenching technology was applied to investigate the primary a-Mg evolution during continuous cooling and isothermal holding. Results indicate that the initial microstructure of slurry produced by SIM is a mixture of irregular grains, which becomes ideally globular when the slurry slowly cools to 620 ~C and isothermally held for at least 30 s. The local solute diffusion leads to dendritic fragmentation and forms separated particles. During prolonged holding, the particle surface gradually becomes smooth because of protuberance melting and groove advancement. Coarsening of a-Mg grains in isothermal holding was analyzed using Lifshitz-Slyozov-Wagner theory. Results suggest that coalescence is most likely the dominant coarsening mechanism in the early stage while Ostwald ripening tends to be the principal one later. The EDS results indicate that a longer holding time leads to AI solute element segregation at the grain boundaries, but Zn distribution within liquid matrix has no obvious change. Semisolid rheoforming(SSR)is a promising technology for the production of Mg wrought alloy in foundry settings.In order to realize SSR,it is necessary to characterize the grain structure evolution during slurry preparation.In this paper,slurry of AZ31 alloy was produced by a novel rheocast process known as self-inoculation method(SIM).Interrupted quenching technology was applied to investigate the primaryα-Mg evolution during continuous cooling and isothermal holding.Results indicate that the initial microstructure of slurry produced by SIM is a mixture of irregular grains,which becomes ideally globular when the slurry slowly cools to 620℃and isothermally held for at least 30 s.The local solute diffusion leads to dendritic fragmentation and forms separated particles.During prolonged holding,the particle surface gradually becomes smooth because of protuberance melting and groove advancement.Coarsening ofα-Mg grains in isothermal holding was analyzed using Lifshitz-Slyozov-Wagner theory.Results suggest that coalescence is most likely the dominant coarsening mechanism in the early stage while Ostwald ripening tends to be the principal one later.The EDS results indicate that a longer holding time leads to Al solute element segregation at the grain boundaries,but Zn distribution within liquid matrix has no obvious change.
出处 《China Foundry》 SCIE CAS 2013年第4期221-226,共6页 中国铸造(英文版)
基金 supported by the National Natural Science Foundation of China(50964010)
  • 相关文献

参考文献5

二级参考文献50

  • 1CHENTi-jun LIYuan-dong HAOYuan.Characterization of Microstructure of Permanent Mold Cast Zinc Alloy ZA27[J].材料热处理学报,2004,25(5):174-179. 被引量:1
  • 2毛卫民,甄子胜,陈洪涛.Microstructures of AZ91D alloy solidified during electromagnetic stirring[J].中国有色金属学会会刊:英文版,2005,15(1):72-76. 被引量:3
  • 3P.K.Seo,C.G.Kang.Grain Size Control of Semisolid A356 Alloy Manufactured by Electromagnetic Stirring[J].Journal of Materials Science & Technology,2005,21(2):219-225. 被引量:23
  • 4ESKIN D G,KATGERMAN S L.Mechanical properties in the semi-solid state and hot tearing of aluminum alloys[J].Progress in Materials Science,2004(49):629-711. 被引量:1
  • 5ATKINSON H V,KAPRANOS P,KIRKWOOD D H.Alloy development for thixoforming[C]// Proceedings of the Sixth International Conference on Semi-Solid Processing of Alloys and Composites.Turin,Italy,2000:443-450. 被引量:1
  • 6LIU D,ATKINSON H V,KAPRANOS P,JIRATTITICHAROEAN W,JONES H.Microstructure evolution and tensile mechanical properties of thixoformed high performance aluminum alloys[J].Mater Sci Eng A,2003,A361:213-224. 被引量:1
  • 7TZIMAS E,ZAVALIANGOS A.A comparative characterization of near-equiaxed microstructures as produced by spray casting,magnetohydrodynamic casting and the stress induced,melt activated process[J].Mater Sci Eng A,2000,A289:217-227. 被引量:1
  • 8KANG C G,SEO P K,JEON Y P.Thixo diecasting process for fabrication of thin-type component with wrought aluminum alloys and its formability limitation[J].Journal of Materials Processing Technology,2005,160:59-69. 被引量:1
  • 9CHOI J C,PARK H J.Microstructure characteristics of aluminum 2024 by cold working in the SIMA process[J].Journal of Materials Technology,1998,82:107-116. 被引量:1
  • 10RACHMAT R S,TAKANO H,IKEYA N,KAMADO S,KOJIMA Y,RO(O)SZ A,RETTENMAYR M,WATRING D.Application of semi-solid forming to 2024 and 7075 wrought aluminum billets fabrication by the EMC process[J].Materials Science Forum,2000,329/330:487-492. 被引量:1

共引文献19

同被引文献44

引证文献5

二级引证文献12

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部