摘要
通过对自动铺带(Automated tape laying,ATL)成型工艺的分析,提出了一种新的铺放质量评分标准。采用响应曲面法(Response surface methodology,RSM)设计了铺放工艺参数优化实验,分析了热风温度、铺放压力和铺放速度各工艺参数及其交互作用对铺放质量的影响,建立了各工艺参数与铺放质量的二次多项式回归方程的预测模型。根据回归方程求得了最佳铺放质量下的工艺参数,以及可接受铺放质量下的最大铺放速度时的工艺条件,为自动铺带工艺参数的控制提供了参考。
Based on the analysis of automated tape laying （ATL） process, this paper proposed a new grading criteria of lay-up quality. Optimization experiment of lay-up processing parameter was designed using response surface methodology （RSM）. Influences of the processing parameters, such as hot-air temperature, lay-up pressure and lay-up velocity, and furthermore, their interaction effects on the lay-up quality were analyzed. A quadratic polynomial regression equation was set up to forecast the relationship between the processing parameters and lay-up quality. Processing parameters for both the best lay-up quality and the maximum lay-up velocity in the acceptable lay-up quality were obtained by the regression equation. The proposed grading criteria and optimization method can be referred for the control of the processing parameters of ATL.
出处
《玻璃钢／复合材料》
CSCD
北大核心
2013年第5期I0037-I0044,共8页
Fiber Reinforced Plastics/Composites
基金
“高档数控机床与基础制造装备”科技重大专项(2010ZX04016-013)
关键词
自动铺带
响应曲面法
Box-Behnken实验设计
工艺参数
铺放质量
预浸料
automated tape laying （ATL）
responses surface methodology （ RSM ）
Box-Behnken design （BBD）
processing parameter
lay-up quality
prepreg
