期刊文献+

Al_2CrFeNiCo_xCuTi高熵合金的组织结构及腐蚀性能研究 被引量:9

Study on Microstructure and Corrosion Resistance of Al_2CrFeNiCo_x CuTi High Entropy Alloy
下载PDF
导出
摘要 采用激光熔覆方法制备了不同Co含量的Al2CrFeNiCoxCuTi(x=0.5、1.0、1.5、2.0)多主元高熵合金,测试了其在1mol/L的NaCl溶液和0.5mol/L的H2SO4溶液中的电化学性能,绘制了相应的极化曲线。结果表明,多主元高熵合金Al2CrFeNiCoxCuTi(x=0.5、1.0、1.5、2.0)的晶体组织为柱状晶和等轴晶,相结构是面心立方(fcc)和体心立方(bcc);随着Co含量的增加,合金中的面心立方结构相逐渐增多,进而增加了合金的晶间腐蚀作用,降低了合金的耐腐蚀性能。 The multi element high entropy alloys Al2 CrFeNiCox CuTi (x = 0. 5,1. 0,1. 5,2. 0) with different Co contents were prepared using laser cladding method. Electrochemical performances of the alloys were tested in 1 mol/L NaC1 solution and 0.5 mol/L H2SO4 solution,and the corresponding polarization curves were drawn. The results show that the high entropy alloys are columnar and equiaxed crystals, with the phase structure of fcc and hcc. The phase of fcc increases gradually with the increase of Co content in the alloys, enhancing intergranular corrosion and then reducing corrosion resistance of the alloys.
出处 《稀有金属与硬质合金》 CAS CSCD 北大核心 2013年第4期38-41,共4页 Rare Metals and Cemented Carbides
关键词 Al2CrFeNiCoxCuTi高熵合金 激光熔覆 极化曲线 微观结构 Al2 CrFeNiCox CuTi high entropy alloy laser cladding polarization curve microstructure
  • 相关文献

参考文献9

  • 1Yeh J W,Chen S K ,Lin S J , etal. Nanost ructured high-entropy alloys with multiple principal element[J].Advanced Engineering Material, 2004,6(5): 299-303. 被引量:1
  • 2刘源,李言祥,陈祥,陈敏.多主元高熵合金研究进展[J].材料导报,2006,20(4):4-6. 被引量:83
  • 3Zhou Y J, Zhang Y, Kim T N,et al. Microstructure char- acterizations and strengthening mechanism of multiprin cipal component AlCoCrFeNiTi0.5 solid solution alloy with excellent mechanical properties[J].Materials Let- ters,2008,62(17-18):2 673-2 676. 被引量:1
  • 4Chen Y Y, Hong U T, Shih H C, et al. Electrochemical kinetics of the high entropy alloys in aqueous environ- ments a comparison with type 304 stainless steel [J]. Corrosion Science, 2005,47 (11) : 2 679-2 699. 被引量:1
  • 5Wu J M,Lin S J,Yeh J W,etal. Adhesive wear behavior of AlxCoCrCuFeNi high-entropy alloys as a function of aluminum content[J]. Wear,2006,261(5-6) :513-519. 被引量:1
  • 6崔忠圻.金属学与热处理[M].北京:机械工业出版社,2008,80-86. 被引量:24
  • 7李伟,刘贵仲,郭景杰.AlFeCuCoNiCrTi_x高熵合金的组织结构及电化学性能[J].特种铸造及有色合金,2009,29(10):941-944. 被引量:30
  • 8童重缙.Cu-Co-Ni-Cr-Al-Fe高熵合金变形结构与高温特性之研究[D].台北:国立清华大学,2002. 被引量:8
  • 9李伟,刘贵仲,郭景杰.AlxFeCoNiCrTi系高熵合金的组织结构及电化学性能研究[J].铸造,2009,58(5):431-435. 被引量:21

二级参考文献45

  • 1刘源,李言祥,陈祥,陈敏.多主元高熵合金研究进展[J].材料导报,2006,20(4):4-6. 被引量:83
  • 2童重缙.Cu-Co-Ni-Cr-Al-Fe高熵合金变形结构与高温特性之研究[D].台北:国立清华大学,2002. 被引量:8
  • 3陈岳锋.CoCrFrNiTi高乱度合金块材与薄膜性质之研究[D].台湾:私立中国文化大学.2004. 被引量:5
  • 4Yeh Jien-Wei, Chen Swe-Kai, Gan Jon-Yiew, et al. Nanostruetured High-Entropy Alloys With Multiple Principal Element [J]. Advanced Engineering Material, 2004, 6 (5): 299-303. 被引量:1
  • 5Swalin R A. Thermodynamics of solids [M]. New York: J Wiley & Sons, 1972: 21-26. 被引量:1
  • 6Tong Chung-Jin, Chen Yu-Liang, Chen Swe-Kai, et al. Microstructure characterization of AlxCoCrCuFeNi high-entropy alloy system with multi-principal elements [J]. Metall.Mat.Trans.A, 2005, 36A: 881-893. 被引量:1
  • 7Zhou Yun-jun, Zhang Yong, Wang Yin-li, et al. Solid solution alloys of AlCoCrFeNiTix with excellent room-temperature mechanical properties [J]. Appl. Phys. Lett., 2007, 90, 181904: 1-3. 被引量:1
  • 8刘源,陈敏,李言祥.多主元高熵合金的组织和性能特点[C]//特种铸造及有色合金年会会刊.郑州:2006:252-255. 被引量:3
  • 9许右睿.FeCoNiCrCux高熵合金之抗蚀性研究[D].台湾:国立台湾海洋大学材料工程研究所,2004. 被引量:2
  • 10Rapp R A. Kinetics, microstructures and mechanism of internal oxidation-its effect and prevention in high temperature alloy oxidation [J]. Corrosion, 1965, 21: 382-401. 被引量:1

共引文献143

同被引文献139

引证文献9

二级引证文献82

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部