摘要
采用沿经向切片积分的方法计算2.5维机织复合材料的宏观经向拉伸弹性模量,与试验结果和传统的体积平均合成方法进行了对比,分析表明,本文中的方法能够有效提高传统体积平均法的预测精度。利用文中的方法分析了2.5维机织复合材料沿在机织循环过程中的经向拉伸弹性模量分布情况,并且对相关机织结构的2.5维机织复合材料进行了试验研究。研究发现,经纱弯曲程度较小的直联结构和添加平直经纱的衬经结构能够有效提高2.5维机织复合材料的经向拉伸弹性模量,并且能够改善经向拉伸应力-应变曲线的非线性。
This paper developed an integral method with the integration path of warp direction to predict the macro elastic property in warp direction of 2. 5D woven composites. The evaluated elastic modulus was compared with experimental results and classical volume average method. It shows that the predicted value is much better, and the predicted method is more effective. The distribution of elastic property during woven cyclic process in the warp direction of 2. 5D woven composites was investigated, and some experiments were done with similar woven structures of 2.5D woven composite. It shows that the smaller bending angle of warp and the additional straight warp can improve the elastic property in the warp direction of 2. 5D woven composites, and the nonlinearity of stress -strain curve can also be improved.
出处
《复合材料学报》
EI
CAS
CSCD
北大核心
2013年第3期198-204,共7页
Acta Materiae Compositae Sinica
基金
中央高校基本科研业务费专项资金(NZ2012113)
