期刊文献+

基于双色条纹投影的薄膜振动模式分析 被引量:1

Vibration Mode Analysis of Membrane Based on Bi-Color Fringe Projection
原文传递
导出
摘要 结构光投影和条纹时间平均分析技术已被用于振动模式分析中,但由于投影单色正弦条纹时振动薄膜变形条纹傅里叶谱中零频涵盖范围较大,会限制滤波窗的选取范围,从而影响模式的最终重建结果。为提高振动模式重建的准确性,提出了一种利用π相移正弦条纹投影进行薄膜振动模式分析和振幅重建的方法,通过处理两个通道的条纹分量达到消除零频的目的。给出了该方法的理论分析,完成了相应的计算机模拟,分析了影响测量精度的因素。通过与投影单色正弦条纹的振动模式重建结果对比,表明该方法有较高的重建精度。不同激励频率下的实际薄膜振动实验结果也证明了该方法正确可行。 Structured light projection and time-average fringe method is used in vibration mode analysis. When a monochromatic sinusoidal grating is projected onto the surface of a vibrating membrane, the zero component in Fourier spectrum domain of the corresponding deformation fringe pattern would extend to a large range and increase the difficulty of filtering window selection, which would finally influence the accuracy of the mode reconstruction result. A method by projecting phase shifting bi-color sinusoidal fringe in vibration mode analysis and amplitude reconstruction of a vibrating membrane is presented in this paper to improve the accuracy of vibration mode reconstruction. The zero component of Fourier spectrum is eliminated by processing the fringe components in two color channels. The result of theoretical analysis and computer simu lations show that the proposed method in this paper can effectively improve the reconstruction accuracy of the vibration mode by comparing with the method using a monochrome sinusoidal fringe projection. The actual experimental results of a tested vibrating membrane excited by different vibration frequencies also identify the validity of this method.
出处 《光学与光电技术》 2013年第2期59-66,共8页 Optics & Optoelectronic Technology
基金 国家自然科学基金(60807006) 教育部新世纪优秀人才支持计划(NCET-11-0357)资助项目
关键词 信息光学 振动测量 振动模式分析 双色条纹投影 傅里叶频谱 information optics vibration measurement vibration mode analysis bi color fringe projection fourier spectrum
  • 相关文献

参考文献11

二级参考文献29

  • 1芮嘉白,金观昌,徐秉业.一种新的数字散斑相关方法及其应用[J].力学学报,1994,26(5):599-607. 被引量:102
  • 2Chen Wenjing Su Xianyu TanSongxin.Basic requirement for measurement system in FTP[J].光电子·激光 J,1999,10(6):535-539. 被引量:1
  • 3Takeda M, Mutoh K. Fourier transform profilometry for the automatic measurement 3-D object shapes. Appl Opt , 1983, 22(24) :3977-3982. 被引量:1
  • 4Lin Jianfeng, Su Xianyu. Two-dimensional Fourier transform profilometry for the automatic measurement of three-dimensional object shapes. Opt Engng , 1995, 34(12):3297-3301. 被引量:1
  • 5Su Xianyu, Li Jian, Guo Lurong. Improved Fourier transform profilometry. Proc. SPIE, 1988, 954:32-35. 被引量:1
  • 6Li Jian, Su Xianyu, Guo Lurong. Improved Fourier transform profilometry of the automatic measurement of three-dimensional object shapes. Opt Engng , 1990, 29(12) : 1439- 1444. 被引量:1
  • 7Chen Wenjing, Su Xianyu. Error caused by sampling in Fourier transform profilometry. Opt Engng , 1999, 38(6) : 1029- 1034. 被引量:1
  • 8胡晓东,齐浩,刘钢,胡春光,胡小唐.基于傅里叶干涉法的微结构离面运动测量[J].光电子.激光,2007,18(8):966-969. 被引量:3
  • 9芮嘉白,力学学报,1994年,26卷,5期,599页 被引量:1
  • 10袁祥辉,固体图像传感器及其应用,1992年 被引量:1

共引文献48

同被引文献5

引证文献1

二级引证文献2

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部