期刊文献+

正交异性钢桥面板U肋与桥面板焊缝连接处疲劳试验研究 被引量:6

Fatigue Test Research of Rib-to-reck Welded Joints of Orthotropic Steel Bridge Deck
下载PDF
导出
摘要 以九江长江公路大桥主跨钢箱梁结构为研究对象,通过对实桥结构的有限元分析,确定了能够反映正交异性钢桥面板U肋与桥面板焊缝连接处受力状态的疲劳试样;依据理论分析和静载试验,获得了加载载荷与研究部位应力的对应关系;通过疲劳试验得到了该结构细节的疲劳破坏形式、应力-寿命曲线及容许应力幅值,为大桥的疲劳寿命评估、健康检测及养护维修提供依据,也为其它桥梁设计提供参考. The main span steel box girder of Jiu-jiang highway bridge over Yangtze river is studied in this pa- per. Through finite element analysis on the real bridge structure, the fatigue specimen which can reflect stress state of rib-to-reck welded joints of orthotropic steel bridge deck is made. Based on the theoretical analysis and static load test ; the corresponding relationship of the load and stress of research part is gotten. The fatigue fail- ure form of the structure detail, stress -life curve and allowable stress amplitude are obtained by the fatigue test. The result can be used for the evaluation of fatigue life, health detection and maintenance and repair of the bridge, which can also be used as reference for the design of other bridges.
出处 《郑州大学学报(工学版)》 CAS 北大核心 2013年第2期89-93,共5页 Journal of Zhengzhou University(Engineering Science)
基金 江西省交通运输厅重点科研资助项目(2010C00003)
关键词 正交异性钢桥面板 U肋 应力分析 疲劳裂纹 orthotropic steel deck U-rib stress analysis fatigue crack
  • 相关文献

参考文献10

  • 1SAMOL Y, KENTARO Y,TOSHIYUKI I. Fatigue E- valuation of Rib - to - Deck Welded Joints of Orthotro- pic Steel Bridge Deck[J]. Journal of Bridge Engineer- ing,2011,16(4) :492 -499. 被引量:1
  • 2XIAO Zhi-gang, KENTARO Y, SAMOL Y, et al. Stress analyses and fatigue evaluation of rib-to-deckjoints in steel orthotropic decks[ J]. International Jour- nal of Fatigue, 2008,38(8) :1387 -1397. 被引量:1
  • 3周建林..苏通大桥主桥钢箱梁桥面板抗压与疲劳性能试验研究[D].同济大学,2007:
  • 4中交公路规划设计院.JTGD60--2004公路桥涵设计通用规范[s].北京:人民交通出版社,2000. 被引量:1
  • 5张启伟,张鹏飞.正交异性钢桥面板焊接节点应力集中系数[J].同济大学学报(自然科学版),2010,38(10):1428-1433. 被引量:18
  • 6陈一馨,吕彭民,宋绪丁,刘永健.钢-混组合梁剪力钉抗剪性能试验研究[J].桥梁建设,2012,42(3):63-69. 被引量:21
  • 7童乐为,沈祖炎.开口纵肋的正交异性钢桥面板疲劳试验研究[J].中国公路学报,1997,10(3):59-65. 被引量:29
  • 8European Committee for Standardization. EN 1993 - 1 - 9 Eurocode 3 : Design of Composite Steel and Con- crete[ S:. 2003. 被引量:1
  • 9中华人民共和国建设部.GB50017-2003钢结构设计规范[S].北京:中国计划出版社,2003. 被引量:285
  • 10中铁大桥勘测设计院有限公司主编..铁路桥梁钢结构设计规范[M].北京:中国铁道出版社,2005.

二级参考文献21

  • 1蔡耀中,肖杭.钢—混凝土组合梁用剪切连接件的研究[J].世界桥梁,2005,33(1):67-69. 被引量:9
  • 2张大勇,董吉斌,王江.浅谈钢纤维混凝土的应用[J].北方交通,2006(3):39-40. 被引量:4
  • 3邵永波,LIE Seng-Tjhen.K节点应力集中系数的试验和数值研究方法[J].工程力学,2006,23(A01):79-85. 被引量:25
  • 4张启伟.苏通大桥斜拉桥运营阶段的结构静力性能测试与研究报告[R].上海:同济大学土木T程学院,2008. 被引量:2
  • 5Efthymiou M, Durkin S. Stress concentrations in T/Y and gap/overlap K-joints[C]//Proceedings of Conference on Behaviour of Offshore Structures. Amsterdam.. Pergamon Publisher, 1985 : 429 - 440. 被引量:1
  • 6Smedle P, Fisher P. Stress concentration factors for simple tubular joints [C]//Proceedings of the First International Offshore and Polar Engineering Conference. Edinburgh: International Society of Offshore & Polar Engineers Publisher, 1991 .475 - 483. 被引量:1
  • 7Soh A K, Soh C K. Stress concentrations of K tubular joints subjected to basic and combined loadings[J]. Structures and Buildings, 1996,116:19. 被引量:1
  • 8Fricke W. Recommended hot spot analysis procedure for structural details of ships and FPSOs based on round-robin FE analysis[J]. Int J Offshore Polar Eng, 2002,12 (1). 40. 被引量:1
  • 9Dong P. A structural stress definition and implementation for fatigue analysis of welded joints[J]. Int J Fatigue, 2001, 23 (10) :865. 被引量:1
  • 10Hobbacher A. Recommendations for fatigue design of weld joints and components[R]. Cambridge: Abington Publishing, 1996. 被引量:1

共引文献346

同被引文献49

引证文献6

二级引证文献40

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部