期刊文献+

钢中马氏体的孪晶亚结构 被引量:15

Twin crystal substructure of martensite in steel
原文传递
导出
摘要 采用JEM-2100高分辨透射电镜观察了含0.029%La纯铁、40Cr、60Si2CrV、W6Mo5Cr4V2和Mn13钢的马氏体组织形貌,并对马氏体组织中的孪晶亚结构的形成机制进行了探讨。研究表明:从超低碳钢到高碳钢,淬火马氏体中均有相变孪晶出现,随着奥氏体中碳含量的提高则马氏体中相变孪晶增加。孪晶亚结构的形成与马氏体相变应变能有关,随着转变温度降低,应变能增大,形成精细孪晶以调节应变能。 The twin crystal substructure of martensite in pure iron containing 0. 029% La, 40Cr, 60Si2CrV, W6MoSCr4V2 and Mn13 steels was observed by JEM-2100 high resolution transmission electron microscope and it formation mechanism was discussed. The results show that from ultra-low carbon steel to high carbon steel, the phase-transformation twin crystal can all form in the quenched martensite and it increases with the increasing of the carbon content in austenite. It is considered that the formation of the twin crystal substructure is related to the strain energy of martensite phase transformation. With the decrease of the temperature of martensite phase transformation,the strain energy increases, and the fine twin crystal comes into being in order to adjust the strain energy.
出处 《材料热处理学报》 EI CAS CSCD 北大核心 2013年第4期162-165,共4页 Transactions of Materials and Heat Treatment
关键词 马氏体 孪晶 高分辨电镜 应变能 martensite twin crystal high resolution transmission electron microscope strain energy
  • 相关文献

参考文献10

  • 1刘宗昌,袁泽喜,刘永长编著..固态相变[M].北京:机械工业出版社,2010:254.
  • 2钢铁研究总院结构材料研究所,等.钢的微观组织图像精选[M].北京:冶金工业出版社,2009. 被引量:11
  • 3JI Yun-ping, LIU Zong-chang, REN Hui-ping. Stacking fauh substructure of martensite in steel [ J ]. Applied Mechanics and Materials, 2012,121 - 126,3493 - 3497. 被引量:1
  • 4刘宗昌,计云萍,段宝玉,任慧平.高碳马氏体片中脊的研究[J].材料热处理学报,2011,32(S1):98-101. 被引量:3
  • 5刘宗昌,计云萍,段宝玉,任慧平.板条状马氏体的亚结构及形成机制[J].材料热处理学报,2011,32(3):56-61. 被引量:27
  • 6LIU Zong-chang,JI Yun-ping, WANG Hai-yan, et al. Discussion of mechanism of martensite phase transformation [ C ].//Proceedings of 2011 International Conference on Mechanical, Industrial, and Manufacturing Engineering. Melbourne,2011 : 350 - 353. 被引量:1
  • 7徐祖耀著..马氏体相变与马氏体 第2版[M].北京:科学出版社,1999:898.
  • 8陈昌曙.自然辩证法概论新编[M].沈阳:东北大学出版社,1997.108-200. 被引量:14
  • 9何肇基.金属的力学性能[M].北京:冶金工业出版社,1982. 被引量:10
  • 10刘跃军,黄伯云,谭玉华.中碳和高碳钢中束状马氏体的形成机理[J].材料热处理学报,2005,26(1):48-52. 被引量:14

二级参考文献31

  • 1徐祖耀.马氏体相变与马氏体[M].北京:科学出版社.1982. 被引量:4
  • 2刘宗昌 王海燕 任慧平.马氏体相变的热激活跃迁机制.科技促进发展,2009,(9):235-237. 被引量:2
  • 3钢铁研究总院结构材料研究所,等.钢的微观组织图像精选[M].北京:冶金工业出版社,2009. 被引量:11
  • 4LIU Zong-chang,WANG Hai-yan, JI Yun-ping, et al. A new concept of martensite transformation mechanism [ C ]//Proceedings of the fourth asian conference on heat treatment and surface engineering, Beijing China,2009:106 -111. 被引量:1
  • 5REN Huiping,WANG Haiyan,LIU Zongchang. Cu clusters evolvement in Fe-1.18% Cu binary alloy [ J ]. Frontiers of Materials Sciense in China, 2007,1 (4) : 342 345. 被引量:1
  • 6Morito S, Tanaka H, Konishi R. The morphology and crystallography of lath martensite in Fe-C alloys[J]. Acta Mater, 2003, 51:1789. 被引量:1
  • 7Morito S, Nishikawa J, Make T. Dislocation density within lath martensite in Fe-C and Fe-N alloys[J]. ISIJ International, 2003, 43(9): 1475. 被引量:1
  • 8谭玉华 胡书琴 董希淳 贺跃辉 曾德长.碳含量对马氏体形态的影响[J].材料とプ口ゼズ,1992,6(6):1919-1919. 被引量:1
  • 9Tan Y H, Zeng D C, Dong X C, et al. New observation of martensitic morphology and substructure using transmission electron microscopy[ J]. Metall Trans,1992, 23A: 1413. 被引量:1
  • 10Zeng D C, Tan Y H, Qiao G W, Chuang Y C. The nature of martensite morphologies in medium and high carbon steels[ J]. Z. Metallkd, 1994, 75: 203. 被引量:1

共引文献67

同被引文献114

引证文献15

二级引证文献43

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部