期刊文献+

Microstructural Development and Deformation Mechanisms during Cold Rolling of a Medium Stacking Fault Energy TWIP Steel 被引量:2

Microstructural Development and Deformation Mechanisms during Cold Rolling of a Medium Stacking Fault Energy TWIP Steel
原文传递
导出
摘要 The magnetic response, microstructural and texture changes occurring during cold rolling of a Fe-14Mn-0.64C-2.4AI-0.25Si medium stacking fault energy TWlP (twinning induced plasticity) steel have been studied by X-ray diffraction and magnetic techniques. The changes in the sub-grain size (Ds), probability of stacking fault formation (Psf) and microstrain in the material as cold rolling progressed were determined by using a modified version of the Williamson and Hall equation. A strong development of the crystallographic texture with increasing deformation was observed. Deformation-induced formation of a small fraction α'-martensite was observed, indicating that the steel also exhibits γ→α'-martensite transformation during cold rolling, which is discussed via the changes of the stacking-fault probability and the texture development during cold rolling. The magnetic response, microstructural and texture changes occurring during cold rolling of a Fe-14Mn-0.64C-2.4AI-0.25Si medium stacking fault energy TWlP (twinning induced plasticity) steel have been studied by X-ray diffraction and magnetic techniques. The changes in the sub-grain size (Ds), probability of stacking fault formation (Psf) and microstrain in the material as cold rolling progressed were determined by using a modified version of the Williamson and Hall equation. A strong development of the crystallographic texture with increasing deformation was observed. Deformation-induced formation of a small fraction α'-martensite was observed, indicating that the steel also exhibits γ→α'-martensite transformation during cold rolling, which is discussed via the changes of the stacking-fault probability and the texture development during cold rolling.
出处 《Journal of Materials Science & Technology》 SCIE EI CAS CSCD 2013年第2期161-167,共7页 材料科学技术(英文版)
关键词 TWIP steel α'-Martensite Sub-grain size Probability of stacking fault formation Texture development TWIP steel α'-Martensite Sub-grain size Probability of stacking fault formation Texture development
  • 相关文献

参考文献36

  • 1O. Grassel, L. Grugger, G. Frommeyer, L.C. Meyer, Int. J. of Plas. 16 (2000) 1391-1409. 被引量:1
  • 2O. Grassel, G. Frommeyer, C. Derder, H. Hofmann, J. Phys. IV 7 (1997) 383--388. 被引量:1
  • 3B. Jiang, X. Qi, S. Yang, W. Zhou, T.Y. Hsu, Acta Mater. 46 (1998) 501--510. 被引量:1
  • 4J.C. Li, W. Zheng, Q. Jiang, Mater. Lett. 38 (1999) 275-277. 被引量:1
  • 5C. Scott, N. Guelton, S. Allain, M. Faral, Revue de Metallurgie 103 (2006) 293--302. 被引量:1
  • 6Y.K. Lee, C.S. Choi, Metall. Mater. Trans. A 31 (2000) 355-360. 被引量:1
  • 7S. Allain, J.P. Chateau, O. Bouaziz, S. Migot, N. Guelton, Mater. Sci. Eng. A 397-389 (2004) 158-162. 被引量:1
  • 8Y.G. Kim, J.M. Han, J.S. Lee, Mater. Sci. Eng. A 114 (1989) 51--59. 被引量:1
  • 9L. Remy, Acta Metall. 25 (1977) 173-179. 被引量:1
  • 10R.EI. Adler, H.M. Otte, C.N.J. Wagner, Metall. Trans. 1 (1970) 2375--2382. 被引量:1

同被引文献22

引证文献2

二级引证文献13

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部