期刊文献+

RDX为主体的石油射孔弹用高聚物炸药研究

Study on Polymer Explosives Used in Oil Perforating Charge Based on RDX
原文传递
导出
摘要 分析了国内传统石油射孔弹炸药存在的缺陷,通过对粘结剂、钝感剂进行研究得到了以 RDX 为基的石油射孔弹用高聚物炸药配方.新配方中 RDX 含量比传统炸药提高了0.4%~0.5%;松装密度达到0.92g/cm3,高于传统炸药8.2%~15.0%;压药打靶实验证明新炸药射孔性能稳定,射孔平均深度大于传统炸药7.1%. In this paper, the defects of the traditional oil perforating explosives were analyzed, the new polymer explosives formula was obtained through the research of binder and desensitizer. The content of RDX in new formula was increased 0.4%~0.5% than that in the traditional explosives. The loose density of new formula explosives was 0.92g/cm3, which is higher than that of traditional explosives by 8.2%-15.0%. The perforating performance of new explosives was proved stable through test, the average perforation depth was deeper than that of traditional explosives by 7.1%.
出处 《火工品》 CAS CSCD 北大核心 2012年第6期30-33,共4页 Initiators & Pyrotechnics
关键词 RDX 粘结剂 钝感剂 新配方 RDX Binder Insensitive agent New formula
  • 相关文献

参考文献10

  • 1张双计,王炜编著..油气井燃烧爆破技术[M].西安:陕西科学技术出版社,2003:215.
  • 2惠宁利,王秀芝.石油工业用爆破技术.北京:石油工业出版社,1994. 被引量:1
  • 3第五机械工业部第二0四研究所火炸药手册编写组.火炸药手册[M].西安:第二0四研究所1981. 被引量:1
  • 4刘家骢,黄桂枝.我国油、气井射孔器材的现状和发展[J].爆破器材,1995,24(6):27-31. 被引量:7
  • 5孙业斌,惠君明,曹欣茂编著..军用混合炸药[M].北京:兵器工业出版社,1995:672.
  • 6张熙和,丁来欣,朱广军.炸药实验室制备方法[M].北京:兵器工业出版社,1995.287-290. 被引量:4
  • 7蔚红建,张丽涵,刘小刚,樊学忠,张双健.RDX包覆与某种键合剂的匹配性研究[J].火炸药学报,2002,25(4):49-50. 被引量:7
  • 8封雪松..高聚物粘结耐热炸药HNS的配方研制及表面界面性能研究[D].南京理工大学,2001:
  • 9李永祥,马建福,刘天生,王凤英.某高聚物包覆RDX的影响因素[J].含能材料,2005,13(6):382-384. 被引量:5
  • 10Q/HYI-IJ05.13-2006SH-931炸药制造工艺规程[S].山西北化关铝化工有限公司,2006. 被引量:1

二级参考文献11

  • 1王北海.NEPE推进剂用中性聚合物键合剂的分子设计[J].固体火箭技术,1994,17(3):47-53. 被引量:14
  • 2侯林法.复合固体推进剂[M].北京:宇航出版社,1994.. 被引量:59
  • 3LIU Yong-liang,WANG Yuan.An investigatation of interactions between RDX and polymer binder by ftir photoacoustic spectroscopy [A].Proceedings of 17th International Pyrotechnics Seminar Combined With the 2nd Beijing,Internation Symposium on Pyrotechnics and Explosives[R]Vol.1,347-352,Beijing,October,28-31,1991. 被引量:1
  • 4Dagley I J.An evaluation of ethylene-vinyl acetate copolymers as desensitizers for RDX an insensitive booster compositions prepared BYI the slurry coating technique [R].MRL Technical Report MRL-TR-89-33,1989. 被引量:1
  • 5Philip S H.Coating process for plastic bonded explosive [P].USP 6485587 B1,Nov.26,2002. 被引量:1
  • 6Hyung S Kim,Hyoun S Kim.Method for preparing a compactable explosive [P].USP 5565651,Oct.15,1996. 被引量:1
  • 7David J Kasprzyk,David A Bell.Characterization of a slurry process used to make a plastic-bonded explosive [J].Propellants,Explosives,Pyrotechnics,1999(24):333-338. 被引量:1
  • 8Terry L St Clair,Poquoson Donald J Progar Yonktown.Polyimide molding powder coating,adhesive and matrix resin [P].USP 5147966,Sep.15,1992. 被引量:1
  • 9杨春盛.双基推进剂硝胺脱湿及其键合剂分子设计[J].火炸药,1997,20(3):25-28. 被引量:9
  • 10陈立新,沈新元.相转化法的湿法成膜机理[J].膜科学与技术,1997,17(3):1-6. 被引量:35

共引文献18

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部