期刊文献+

平面3-RRR柔性并联机器人残余振动主动控制 被引量:11

Active Residual Vibration Control of Planar 3-RRR Flexible Parallel Robots
下载PDF
导出
摘要 对平面3-RRR柔性并联机器人残余振动主动控制问题进行了研究。基于有限元法和拉格朗日方程,建立了带压电陶瓷制动器和传感器的智能梁单元的运动方程。考虑刚体运动和弹性变形运动的约束关系,通过组装,形成了3-RRR柔性并联机器人系统的运动学方程,基于模态理论把物理空间下描述的高阶运动方程变换到模态空间下的低阶模态方程。根据导出的低阶模态方程,设计了应变速度反馈控制器和最优状态反馈控制器,数值仿真结果表明:两种控制器都能有效地抑制系统的残余振动。同时,相对于应变速度反馈控制,最优状态反馈控制能以更低的控制输入电压取得更好的控制效果。 A research concerning active residual vibration control of planar 3-RRR flexible parallel robots was presented.First,based on the finite element method and the Lagrange's equation,the equations of motion of the smart beam bonded lead zirconate titanate(PZT) actuators and sensors were modeled.Considering constraint equations of rigid motion and elastic motion,the general motion equations of planar 3-RRR flexible parallel robots were determined by the compatibility.The high-order equations of the system in physical space were transformed into modal space through the modal theory.According to the low-order modal equations,both the strain rate feedback controler and the optimal state feedback controler were designed for suppressing residual vibration of the system.The numerical simulation results revealed that two kinds of controllers could effectively suppress residual vibration of the system.Moreover,comparing the strain rate feedback control,the optimal state feedback control could obtain better control results in a lower control voltage.
出处 《农业机械学报》 EI CAS CSCD 北大核心 2013年第2期232-237,266,共7页 Transactions of the Chinese Society for Agricultural Machinery
基金 国家自然科学基金重大研究计划资助项目(91223201) 国家杰出青年科学基金资助项目(50825504) NSFC-广东联合基金资助项目(U0934004) 中央高校基本科研业务费专项资金资助项目(2012ZP0004) 广东省高等学校珠江学者岗位计划资助项目(2010)
关键词 平面3-RRR柔性并联机器人 振动主动控制 模态理论 Planar 3-RRR flexible parallel robots Active vibration control Modal theory
  • 相关文献

参考文献20

  • 1Bensoman M,Vey G L. Control of flexible manipulators:a survey[J].Robotica,2004,(05):533-545. 被引量:1
  • 2Dwivedy S K,Eberhard P. Dynamic analysis of flexible manipulators,a literature review[J].Mechanism and Machine Theory,2006,(07):749-777.doi:10.1016/j.mechmachtheory.2006.01.014. 被引量:1
  • 3Tadjhakhsh I G. Stability of motion of elastic planar linkage with application to slider crank mechanism[J].ASME Journal of Mechanical Design,1982,(04):698-703. 被引量:1
  • 4Cleghorn W L,Taborrok B,Fenton R G. Finite element analysis of high-speed flexible mechanisms[J].Mechanism and Machine Theory,1981,(04):407-424. 被引量:1
  • 5Zhang Xianmin,Shen Yunwen,Liu Hongzhao. Optimal design of flexible mechanisms with frequency constraints[J].Mechanism and Machine Theory,1995,(01):131-139. 被引量:1
  • 6El-Dannah E H,Farghaly S H. Vibratory response of a sandwich link in a high-speed mechanism[J].Mechanism and Machine Theory,1993,(03):447-457. 被引量:1
  • 7Ghazavi A,Gardanine F,Ghalhout N G. Dynamic analysis of a composite material flexible robot arm[J].Computers & Structures,1993,(02):315-325. 被引量:1
  • 8Soong K,Sunappan D,Thompson B S. The elastodynamic response of a class of intelligent machinery,part 1:theory[J].ASME Journal Vibration Acoustics and Reliability in Design,1989,(04):430-436. 被引量:1
  • 9Zhang Xianmin,Shao Changjian,Li S. Robust H∞ vibration control for flexible linkage mechanism system with piezoelectric sensors and actuators[J].Journal of Sound and Vibration,2001,(01):145-155.doi:10.1006/jsvi.2000.3413. 被引量:1
  • 10Zhang Xianmin,Shao Changjian,Erdman A G. Active vibration controller design and comparison study of flexible linkage mechanism systems[J].Mechanism and Machine Theory,2002,(09):985-997. 被引量:1

二级参考文献19

  • 1高峰.机构学研究现状与发展趋势的思考[J].机械工程学报,2005,41(8):3-17. 被引量:122
  • 2邹慧君,高峰.现代机构学进展[M].北京:高等教育出版社,2007. 被引量:30
  • 3Wang Xiaoyun, James K M. Dynamic modeling of flexible-link planar parallel platform using a sub-structuring approach [ J J. Mechanism and Machine Theory, 2006, 41 (6) : 671 -687. 被引量:1
  • 4Zhang Xianmin, Liu Jike, Shen Yunwen. A high efficient frequency analysis method for closed flexible mechanism systems [J]. Mechanism and Machine Theory, 1998, 33(8) :1 117 -1 125. 被引量:1
  • 5Zhang Xianmin, Liu Hongzhao, Shen Yunwen. Finite dynamic element analysis for high-speed flexible linkage mechanisms [ J ]. Computers & Structures, 1996, 60(5 ) :787- 796. 被引量:1
  • 6Zhang Xuping, James K M. Dynamic modeling and experimental validation of a 3-PRR parallel manipulator with flexible intermediate links[ J]. Journal of Intelligent & Robotic Systems, 2007, 50(4) :323- 340. 被引量:1
  • 7张宪民,袁剑锋.一种二维平动两自由度平面并联的机器人机构:中国,CNl903521[P].2008—06—18. 被引量:1
  • 8Hu Junfeng, Zhang Xianmin, Zhan Jinqing. Trajectory planning of a novel 2-DOF high-speed planar parallel manipulator [ C]///Proceedings of 1st International Conference on Intelligent Robotics and Applications, ICIRA 2008. Wuhan, China, 2008 : 199 - 207. 被引量:1
  • 9Marc A, Roger B. Synthesis of planar parallel mechanism while considering workspace, dexterity, stiffness and singularity avoidance[ J-. Journal of Mechanical Design, 2006, 128( 1 ) :69 - 78. 被引量:1
  • 10Dou Runliang. Optimum design of 3 - RRR planar parallel manipulators [ J ]. Proc. I. Mech. E. Part C: Mechanical Engineering Science, 2010, 224 (2) :411 - 418. 被引量:1

共引文献26

同被引文献67

  • 1张秀峰,孙立宁.并联机器人技术分析及展望[J].高技术通讯,2004,14(6):107-110. 被引量:11
  • 2韩京清.非线性PID控制器[J].自动化学报,1994,20(4):487-490. 被引量:229
  • 3张天飞,汪鸿振,孙曜.超磁致伸缩作动器用于振动主动控制中的仿真研究[J].振动与冲击,2006,25(1):61-63. 被引量:11
  • 4杜兆才,余跃庆,张绪平.平面柔性并联机器人动力学建模[J].机械工程学报,2007,43(9):96-101. 被引量:23
  • 5TAN D P, JI S M, JIN M S. Intelligent Computer-aided Instruction Modeling and a Method to Optimize Study Strategies for Parallel Robot Instruction[J]. IEEE Trans. Ednc, 2013,56(3) : 268-273. 被引量:1
  • 6KUNT E D, NASKALI A T, SABANOVIC A.Miniaturized Modular Manipulator Design for High Precision Assembly and Manipulation Tasks[C]// In The 12th IEEE International Workshop on Advanced Motion Control, Sarajevo, B & H, 2012. 被引量:1
  • 7YU D. Parallel Robots Pose Accuracy Compensation Using Back Propagation Network[J]. International Journal of Physi- cal Science, 2011,6 (21 ) : 5005-5011. 被引量:1
  • 8STAN S D, MANIC M, SZEP C, et al. Performance Analysis of 3 DOF Delta ParalleL Robot. Human System Interactions (HIS) [C ]//2011 4th International Conference on, Yokohama, Japan, 2011 : 215-220. 被引量:1
  • 9CAI G P, HONG J Z , YAN S X. Model Study and Active Con- trol of a Rotating Flexible Cantilever Beam[J]. International Journal of Mechanical Sciences, 2004,46 : 871-889. 被引量:1
  • 10MEGAHED S M, HAMZA K T. Modeling and Simulation of Planar Flexible Link Manipulators with Rigid Rip Connec- tions to Revolute Joints[J]. Robotica, 2004,22 : 285-300. 被引量:1

引证文献11

二级引证文献54

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部