期刊文献+

Experimental study of the effect of blade tip clearance and blade angle error on the performance of mixed-flow pump 被引量:13

Experimental study of the effect of blade tip clearance and blade angle error on the performance of mixed-flow pump
原文传递
导出
摘要 The hydraulic performance test of the mixed-flow pump has been carried out through selecting different blade tip clearances and various blade angle errors.The ratio of the mixed-flow pump efficiency reduction and the blade tip clearance variation(η/δ) varies with the flow rate coefficient revealing a parabolic trend.An empirical equation has been developed for the mixed-flow pump model by parabolic fitting.For the same blade tip clearance variation δ,the mixed-flow pump efficiency reduction η increases rapidly as the flow rate rises.For any given flow rate,the efficiency,the head and the shaft power of the mixed-flow pump all decrease with the increase of the blade tip clearance.Among them,the efficiency reduction η varies approximately linearly with the blade tip clearance variation δ.When the angle of an individual blade of the mixed-flow pump has a deviation,the performance curves will move and change.These curves have consistent change directions with the performance curves under the condition of all the blades rotated at the same time,but have smaller offset and lower range of variation.When an individual blade angle error changes to ±2°,the optimal efficiency of the mixed-flow pump will have no significant difference.When the individual blade angle error increases to ±4°,the optimal efficiency will decrease by 1%.
出处 《Science China(Technological Sciences)》 SCIE EI CAS 2013年第2期293-298,共6页 中国科学(技术科学英文版)
基金 supported by the National Natural Science Foundation of China (Grant No. 51176088)
关键词 mixed-flow pump model test hydraulic performance blade tip clearance blade angle 叶尖间隙 角度误差 混流泵 性能测试 叶片 实验 性能曲线 刀片式服务器
  • 相关文献

参考文献15

二级参考文献17

  • 1KIM Jin-Hyuk,AHN Hyung-Jin,KIM Kwang-Yong.High-efficiency design of a mixed-flow pump[J].Science China(Technological Sciences),2010,53(1):24-27. 被引量:41
  • 2曹树良,梁莉,祝宝山,陆力.高比转速混流泵叶轮设计方法[J].江苏大学学报(自然科学版),2005,26(3):185-188. 被引量:41
  • 3Goto A.Hydrodynamic design of pump diffuser using inverse design method and CFD. FEDSM 98-4854 . 1998 被引量:1
  • 4Gulich J F.Impact of three-dimensional phenomena on the design of rotodynamic pumps. Proc Inst Mech Eng,Part C,J Power Energy . 1998 被引量:1
  • 5Tamaki H,Nakao H,Saito M.The experimental study of matching between centrifugal compressor impeller and diffuser. ASME J Tur-bomach . 1999 被引量:1
  • 6Oh H W,Kim K Y.Conceptual design optimization of mixed-flow pump impellers using mean streamline analysis. Proc Inst Mech Eng, Part A,J Power Energy . 2000 被引量:1
  • 7Zangeneh M,Goto A,Harada H.On the role of three-dimensional inverse design methods in turbomachinery shape optimization. Proc Inst Mech Eng,Part A,J Power Energy . 1998 被引量:1
  • 8ANSYS CFX-11.0 Solver Theory. . 2006 被引量:1
  • 9MINER S M.CFD Analysis of the first-stage rotor and stator in a two-stage mixed flow pump. International Journal of Rotating Machinery . 2005 被引量:1
  • 10Zangeneh M,Goto A,Takemura T.Suppression of Secondary Flow in a Mixed Flow Pump Impeller by Application of 3D Inverse Design Method. Part 1. Ddesign and Numerical Validation. T. ASME, Journal of turbomachinery . 1996 被引量:1

共引文献65

同被引文献80

引证文献13

二级引证文献50

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部