摘要
During the process of local post-weld heat treatment （ PWHT） , the temperature difference inside the weld overlay is a very influential factor on relieving residual stress. In this paper, a commercial program （ABAQUS） was used to simulate the temperature field in turbine rotor, and the influence of heat treatment parameters on temperature was investigated by finite element method. Weight analysis shows that the holding temperature and heating rate are the main factors affecting on temperature, especially the holding temperature. Besides, two regression equations that reflect the relationship between temperature and heat treatment parameters were fitted with uniform design method. Both the correlation coefficients of the regression equations are up to O. 999 2, and the maximum residual error is only O. 7. The agreement between simulation results and regression results is shown to be excellent. At the end, local heat treatment parameters were optimized using the simplex method.
During the process of local post-weld heat treatment （ PWHT） , the temperature difference inside the weld overlay is a very influential factor on relieving residual stress. In this paper, a commercial program （ABAQUS） was used to simulate the temperature field in turbine rotor, and the influence of heat treatment parameters on temperature was investigated by finite element method. Weight analysis shows that the holding temperature and heating rate are the main factors affecting on temperature, especially the holding temperature. Besides, two regression equations that reflect the relationship between temperature and heat treatment parameters were fitted with uniform design method. Both the correlation coefficients of the regression equations are up to O. 999 2, and the maximum residual error is only O. 7. The agreement between simulation results and regression results is shown to be excellent. At the end, local heat treatment parameters were optimized using the simplex method.
