期刊文献+

基于不同基体条件的Sm_2Zr_2O_7/YSZ双层热障涂层界面残余热应力的数值仿真 被引量:3

Numerical Simulation of Residual Thermal Stresses at the Interface of Sm_2Zr_2O_7/YSZ Double-layer Thermal Barrier Coatings Based on Different Matrix Conditions
下载PDF
导出
摘要 采用有限元分析软件ANSYS对2Cr13基体等离子喷涂Sm2Zr2O7/YSZ双层热障涂层界面残余热应力分布进行了仿真。结果表明:在涂层Sm2Zr2O7/YSZ及YSZ/NiCoCrAlY界面存在较大的残余热应力,且应力梯度基本不变,表明应力梯度与基体厚度、半径无关。 The distribution of residual thermal stresses at the interface of plasma sprayed Sm2Zr2O7/YSZdouble-layer thermal barrier coatings on 2Cr13 substrates were simulated by using ANSYS software. Results show that higher residual thermal stresses exist in theSm2Zr2O7/YSZ layer interface and the YSZE NJCoCrAIY layer interface, and the stress gradient is basically unchanged. It is also indicated that the stress gradient is independent of Matrix thickness and radius.
出处 《陶瓷学报》 CAS 北大核心 2012年第3期304-309,共6页 Journal of Ceramics
关键词 双层热障涂层 有限元数值仿真 涂层界面 残余热应力 应力梯度 double-layer thermal barrier coatings finite element numerical simulation coating interface residual thermalstress stress gradient
  • 相关文献

参考文献15

  • 1KHOR K A, GUY W. Effects of residual stress on the performance of plasma sprayed functionally graded ZrOy'NiCoCrA1Y coafing- MaterialsScienceandEngineering,2000,A277:64-76. 被引量:1
  • 2BUSSO E P, EVANS H E, QIAN Z Q, et al. Effects of breakaway oxidation on local stresses in thermal barrier coatings. Acta Materialia, 2010, 58:1242-1251. 被引量:1
  • 3RANJBAR-FAR M, ABSI J, MARIAUX G, et al. Simulation of the effect of material properties and interface roughness onthe stress distribution in thermal barrier coatings using finite dement method. Materials and Design, 2010, 31:772-781. 被引量:1
  • 4VASSEN R, JARLIGO M O, STEINKE T, et al. Overview on advanced thermal barrier coatings. Surface & Coatings Technology, 2010, 205:938-942. 被引量:1
  • 5XU H B, GONG S K, ZHANG Y, et al. Experimental and computational study on hot fatigue process of thermal barrier coatings by EB-PVD. Intermetallics, 2005, 13:315-22. 被引量:1
  • 6SERAFFON M, SIMMS N J, SUMNER J, et al. The development of new bond coat compositions for thermal barrier coating systems operating under industrial gas turbine conditions. Surface & Coatings Technology, 2011,06:9-18. 被引量:1
  • 7BALLARD J D, DAVENPORT J, LEWIS C, et al. Phase stability of thermal barrier coatings made from 8wt.% yttria stabilized zirconia: A technical note. Journal of Thermal Spray Technology, 2003, 3(12): 34-37. 被引量:1
  • 8CLARKE D R, PHILLPOT S R. Thermal barrier coating materials. Mater. Today, 2005, 8:22-29. 被引量:1
  • 9CAO X Q, R VASSEN, STEVER D. Ceramic materials for thermal barrier coatings. J. Eur. Ceram. Sot., 2004, 24:1-10. 被引量:1
  • 10YU J H, ZHAO H Y, TAO S Y, et al. Thermal conductivity of plasma sprayed Sm2Zr207 coatings. J. Eur. Ceram. Soc., 2010, 30:700-804. 被引量:1

同被引文献44

  • 1张红松,王富耻,马壮,成志芳,王全胜,冼文锋.等离子喷涂ZrO_2涂层孔隙定量分析[J].材料工程,2006,34(z1):407-410. 被引量:19
  • 2夏峰,李建平,李高宏,杨通,秦滢杰,余申卫,郭永春,张康虎,杨忠.熔体搅拌法制备高阻尼铝基复合材料的组织与性能[J].铸造,2005,54(12):1223-1226. 被引量:6
  • 3刘纯波,林锋,蒋显亮.热障涂层的研究现状与发展趋势[J].中国有色金属学报,2007,17(1):1-13. 被引量:137
  • 4Wang Chunxia,Yu Fuxiao,Zhao Dazhi,Zhao Xiang,Zuo Liang.Hot deformation and processing maps of DC cast Al-15%Si alloy[J]. Materials Science & Engineering A . 2013 被引量:2
  • 5F. Alshmri,H.V. Atkinson,S.V. Hainsworth,C. Haidon,S.D.A. Lawes.Dry sliding wear of aluminium-high silicon hypereutectic alloys[J]. Wear . 2014 (1-2) 被引量:1
  • 6H.E. Hu,Xin-yun Wang,Lei Deng.High temperature deformation behavior and optimal hot processing parameters of Al–Si eutectic alloy[J]. Materials Science & Engineering A . 2013 被引量:1
  • 7Hyun Kwang Seok,Jae Chul Lee,Ho In Lee.Extrusion of spray-formed Al–25Si–X composites and their evaluation[J]. Journal of Materials Processing Tech. . 2004 (3) 被引量:1
  • 8Yong Du,Y.A Chang,Baiyun Huang,Weiping Gong,Zhanpeng Jin,Honghui Xu,Zhaohui Yuan,Yong Liu,Yuehui He,F.-Y Xie.Diffusion coefficients of some solutes in fcc and liquid Al: critical evaluation and correlation[J]. Materials Science & Engineering A . 2003 (1) 被引量:1
  • 9Haizhi Ye.An overview of the development of Al-Si-Alloy based material for engine applications[J]. Journal of Materials Engineering and Performance . 2003 (3) 被引量:1
  • 10H. Jones.A perspective on the development of rapid solidification and nonequilibrium processing and its future[J]. Materials Science & Engineering A . 2001 被引量:1

引证文献3

二级引证文献9

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部