期刊文献+

Fe-25Cr-35Ni系合金中的第二相 被引量:2

Second Phases in Fe-25Cr-35Ni Based Super Alloy
下载PDF
导出
摘要 采用光学显微镜和扫描电子显微镜以及能谱仪研究了Fe-25Cr-35Ni系合金中的第二相种类和分布。结果表明:Fe-25Cr-35Ni系合金中的第二相主要有3种,即富铌相、氮化物相和碳化物相;其中,富铌相主要沿晶界分布,并且富铌相之间存在成分差异;氮化物相主要为TiN,一般与富铌相共生,其分布主要与氮化物偏析有关;碳化物相数量较多,分布较广泛,晶内、晶界、孪晶界和孪晶内均有分布,经高温固溶处理后可固溶到奥氏体基体中。 The second phases and their distribution in Fe-25Cr-35Ni based super alloy were investigated through optical microscope, scanning electron microscope and energy diffraction spectrum. The results show that there are mainly three kinds of second phases in Fe-25Cr-35Ni based super alloy and they are Nb-rich phase, nitride phase and carbide phase. The Nb-rich phases mainly distribute along the grain ground, and there is chemical compositions difference between the Nb-rich phases. The nitride phases mainly are TiN and generally intergrow with the Nb-rich phases, and their distributing relates to the segregation of nitride. The carbide phases amount is more and they distribute in the grains, grain boundaries, twins and twin boundaries. And the carbide phases could be dissolved into the base metal after high temperature solution treatment.
出处 《理化检验(物理分册)》 CAS 2012年第8期500-503,共4页 Physical Testing and Chemical Analysis(Part A:Physical Testing)
关键词 Fe-25Cr-35Ni系合金 富铌相 氮化物相 碳化物相 Fe-25Cr-35Ni based super alloy Nb-rich phase nitride phase carbide phase
  • 相关文献

参考文献6

  • 1DEHMOLAEI R, SHAMANIAN M. Microstructural characterization of dissimilar welds between alloy 800 and HP heat-resistant steel [J]. Materials Characterization, 2008,58 : 1447-1454. 被引量:1
  • 2LUIZ H, RIBEIRO A F, MAY I. Microstructural characterization of modified 25Cr-35Ni centrifugally cast steel furnace tubes [J]. Materials Characterization, 2002,49: 219-229. 被引量:1
  • 3KENIK E A, MAZIASZ P J. Structure and phase stability in a cast modified-HP austenite after long- term ageing [J]. Scripta Materialia, 2003, 49: 117- 122. 被引量:1
  • 4吴欣强,杨院生,詹倩,胡壮麒.25Cr35Ni耐热合金表面结焦机制[J].腐蚀科学与防护技术,1999,11(5):274-278. 被引量:11
  • 5WU X Q, YANG Y S, ZHAN Q, et al. Structure degradation of 25Cr35Ni heat-resistant tube associated with surface coking and internal carburization [J]. Journal of Material Engineering and Performance, 1998,7:667-672. 被引量:1
  • 6黄乾尧,李汉康等编著..高温合金[M].北京:冶金工业出版社,2000:401.

二级参考文献3

  • 1黄立钧 曾清泉等(译).裂解理论和工业实践[M].北京:化工出版社,1990.480. 被引量:2
  • 2Mitchell D R G,J Mater Sci,1994年,29卷,4357页 被引量:1
  • 3黄立钧(译),裂解理论和工业实践,1990年,480页 被引量:1

共引文献10

同被引文献13

引证文献2

二级引证文献13

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部