摘要
用传统陶瓷的流延工艺制备ZrB2–SiC多层陶瓷。用Archimedes法测定ZrB2–SiC多层陶瓷的相对密度。用扫描电子显微镜观察其显微结构,并进行循环抗氧化性能评价。结果表明:ZrB2–SiC多层陶瓷在1 950℃烧结的致密度达到99.7%,材料的抗氧化过程主要可分为两个阶段:第一阶段低熔点相的挥发,出现质量损失;第二阶段氧化层的形成,降低进一步氧化速率。抗氧化性能较ZrB2–SiC复相陶瓷有很大提高。
ZrB2-SiC multilayer ceramic was prepared by a coneventional ceramic tape casting technology. The density was measured using the Archimede method. The microstructure of samples was observed by scanning electron microscopy. The oxidation resistance ofZrB2-SiC multilayer ceramics was also determined. The results indicate that for the product sintered at 1 950 ℃, the relative density is 99.7%. During the oxidation process of this material, the low melting phase is firstly volatilized, and then the oxidation layer is formed, which can diminish the further oxidation. The oxidation resistance of ZrB2-SiC multilayer ceramic was better than that of ZrB2-SiC monolithic ceramics.
出处
《硅酸盐学报》
EI
CAS
CSCD
北大核心
2012年第8期1174-1178,共5页
Journal of The Chinese Ceramic Society
关键词
流延
硼化锆–碳化硅多层陶瓷
热压烧结
抗氧化
tape casting
zirconium diboride-silicon carbide multilayer ceramic
hot pressing
oxidation resistance