摘要
采用共价接枝法制备APTS改性介孔分子筛SBA-15,将氨基官能团接枝到SBA-15表面.并采用化学还原法制备了Ni-B/SBA-15-APTS非晶态合金催化剂,以噻吩加氢脱硫为探针反应,研究了其催化加氢脱硫性能.结果表明,240℃时,APTS改性SBA-15所负载的Ni-B催化剂噻吩转化率达到50.8%,较未改性SBA-15所负载的催化剂噻吩转化率有显著地提高.由于氨基与Ni2+的配合作用,有助于Ni在催化剂中的分散,因而更容易被还原.ICP结果表明,在相同的制备条件下,相比未改性的SBA-15,APTS改性SBA-15使其催化剂中Ni的负载量增加,并且非晶态合金组成中Ni的含量也增大,B的含量降低,有利于提高催化剂的活性.
SBA-15 was modified by APTS with covalent grafting method,and then Ni-B amorphous alloy catalysts were prepared by using APTS modified SBA-15 and unmodified SBA-15 as supports.The catalytic activities of both catalysts were characterized,and thiophene hydrodesulfurization was selected as probe reaction.The results show that thiophene conversation of Ni-B/SBA-15-APTS is 50.8%,which is higher than the one of Ni-B/SBA-15.The complexation between NH2 and Ni2＋ would be benefit for dispersion of Ni-B alloy particles and reduction of Ni2＋.According to ICP results,Ni-B/SBA-15-APTS show bigger quantity of Ni in support and higher content of Ni in Ni-B amorphous alloy than Ni-B/SBA-15,resulting in the higher activity.
出处
《分子催化》
EI
CAS
CSCD
北大核心
2012年第2期148-153,共6页
Journal of Molecular Catalysis(China)
基金
国家自然科学基金(No.2086300621166019)
江西省教育厅(No.GJJ09078)资助项目
