期刊文献+

Constitutive model for concrete subjected to impact loading 被引量:6

冲击载荷作用下混凝土本构模型(英文)
下载PDF
导出
摘要 To better design and analyze concrete structures, the mechanical properties of concrete subjected to impact loadings are investigated. Concrete is considered to be a two-phase composite made up of micro-cracks and solid parts which consist of coarse aggregate particles and a cement mortar matrix. The cement mortar matrix is assumed to be elastic, homogeneous and isotropic. Based on the Moil-Tanaka concept of average stress and the Eshelby equivalent inclusion theory, a dynamic constitutive model is developed to simulate the impact responses of concrete. The impact compression experiments of concrete and cement mortar are also carried out. Experimental results show that concrete and cement mortar are rate-dependent. Under the same impact velocity, the load-carrying capacity of concrete is higher than that of cement mortar. Whereas, the maximum strain of concrete is lower than that of cement mortar. Regardless of whether it is concrete or cement mortar, with the increase in the impact velocity, the fragment size of specimens after experiment decreases. 为了更好地设计和分析混凝土结构,对冲击荷载作用下混凝土材料的力学特性进行了研究.将混凝土材料看成实体和微裂纹组成的复合材料,其中实体由粗骨料和水泥砂浆基体组成.假设水泥砂浆基体为弹性的、均匀的和各向同性的.基于Mori-Tanaka理论和Eshelby等效夹杂理论建立了冲击荷载作用下混凝土材料的动态本构模型.同时,进行了混凝土和水泥砂浆的冲击压缩试验.实验表明:混凝土和水泥砂浆都是率相关材料.在相同的冲击速度下,混凝土比水泥砂浆具有更高的承载能力,但混凝土的最大应变低于水泥砂浆材料.不论混凝土材料还是水泥砂浆材料,随着冲击速度的提高,破坏实验后试件的尺寸都逐渐减小.
出处 《Journal of Southeast University(English Edition)》 EI CAS 2012年第1期79-84,共6页 东南大学学报(英文版)
基金 The National Natural Science Foundation of China(No. 11162015) the Natural Science Foundation of Ningxia Hui Autonomous Region (No. NZ1106)
关键词 CONCRETE MICROMECHANICS dynamic constitutivemodel impact loading 混凝土 细观力学 动态本构模型 冲击荷载
  • 相关文献

参考文献18

  • 1Malvem L E,Jenkins D A,Tang T X. Dynamic compressive testing of concrete[A].Panama City Beach,FL,USA,1984.194-199. 被引量:1
  • 2Grote D L,Park S W,Zhou M. Dynamic behavior of concrete at high strain rates and pressures:experimental characterization[J].lnternational Journal of Impact Engineering,2001,(09):869-886. 被引量:1
  • 3Ross C A,Tedesco J W,Kuennen S T. Effects of strain rate on concrete strength[J].ACI Materials Journal,1995,(01):37-47. 被引量:1
  • 4Bischoff P H,Perry S H. Impact behavior of plain concrete in uniaxial compression[J].Journal of Engineering Mechanics,1995,(06):685-693.doi:10.1061/(ASCE)0733-9399(1995)121:6(685). 被引量:1
  • 5Ning J G,Shang L,Sun Y X. Investigation on impact behavior of concrete[J].Acta Mechanica Sinica,2006,(02):199-208. 被引量:1
  • 6Bhatti A Q,Kishi N. Constitutive model for absorbing system of RC girders used in rock-sheds under fairing weight impact loading test[J].Nuclear Engineering and Design,2010,(10):2626-2632. 被引量:1
  • 7Georgin J F,Reynouard J M. Modeling of structures subjected to impact:concrete behavior under high swain rate[J].Cement and Concrete Composites,2003,(01):131-143. 被引量:1
  • 8Morit T,Tanaka K. Average stress in matrix and average energy of materials with misfitting inclusions[J].Acta Metallurgica Et Materialia,1973,(05):571-574. 被引量:1
  • 9Eshelby J D. The Determination of the elastic field of an ellipsoidal inclusion and related problems[J].Proceedings of the Royal Society of London:Series A,1957,(1226):376-396. 被引量:1
  • 10Ravichandran G,Subhash G. A micromechanical model for high strain rate behavior of ceramics[J].International Journal of Solids and Structures,1995,(17/18):2627-2646. 被引量:1

同被引文献54

引证文献6

二级引证文献34

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部