期刊文献+

复合电流驱动的永磁同步平面电机 被引量:1

Composite-Current Driven Synchronous Permanent Magnet Planar Motors
下载PDF
导出
摘要 提出一种新型复合电流驱动的永磁同步平面电机,简单介绍了该平面电机的结构和原理,利用标量磁位和边界条件对永磁阵列所产生的磁场进行解析分析,分别推导出电磁力和反电动势的表达式,建立电机的数学模型。在实验室条件下,设计制造一台样机并进行相关实验研究,通过对比试验和仿真结果,验证了解析设计的合理性。 A novel composite-current driven synchronous permanent magnet planar motor is proposed.The operation principle and structure of this planar motor are introduced.Based on scalar magnetic potential equation and boundary conditions,flux density distribution induced by the permanent magnet array is analyzed analytically.And then the expressions of the forces and back-EMF are derived respectively.In our laboratory,a prototype machine is designed and manufactured.And some experimental study is carried out,which validate the analytical and simulated results.
出处 《电工技术学报》 EI CSCD 北大核心 2012年第3期139-146,共8页 Transactions of China Electrotechnical Society
基金 国家科技重大专项(2009ZX02207-001) 新世纪优秀人才支持计划(NCET-08-0158)资助项目
关键词 复合电流驱动 平面电机 永磁阵列 Composite-current driven planar motor permanent magnet array
  • 相关文献

参考文献15

  • 1寇宝泉,贵献国,吴红星,等.复合电流驱动九相平面电机、直线-旋转电机及其驱动器:中国,200910138883,1[P].2009. 被引量:3
  • 2Pan J F,Cheung N C,Gan W C.A novel planarswitched reluctance motor for industrial applications[J].IEEE Transactions on Magnetics,2006,42(10):2836-2839. 被引量:1
  • 3Fujii N,Fujitake M.Two-dimensional drivecharacteristics by circular shaped motor[J].IEEETransactions on Industry Applications,1999,35(4):803-809. 被引量:1
  • 4Cho H S,Jung H K.Analysis and design ofsynchronous permanent-magnet planar motors[J].IEEE Transactions on Energy Conversion,2002,17(4):492-499. 被引量:1
  • 5Cao Jiayong,Zhu Yu,Wang Jinsong.A novelsynchronous permanent magnet planar motor and itsmodel for control applications[J].IEEE Transactionson Magnetics,2005,41(6):2156-2162. 被引量:1
  • 6Gao Wei,Dejima Shuichi,Yanai Hiroaki.A surfacemotor-driven planar motion stage integrated with anx-y-θz surface encoder for precision positioning[J].Precision Engineering,2004,28(3):329-337. 被引量:1
  • 7曹家勇,朱煜,汪劲松,尹文生,段广洪,张鸣.平面电动机设计、控制与应用技术综述[J].电工技术学报,2005,20(4):1-8. 被引量:29
  • 8周赣,黄学良,周勤博,傅萌,张前,冯传水.基于模式力的平面电机控制方法[J].电工技术学报,2009,24(2):20-26. 被引量:5
  • 9郝晓红,梅雪松,张东升,陶涛,姜歌东.动磁型同步表面电机的磁场和推力[J].西安交通大学学报,2006,40(7):823-826. 被引量:5
  • 10Kim W J.High-precision planar magnetic levitation[D].Cambridje:Massachusetts Institute of Technology,1997. 被引量:1

二级参考文献55

  • 1杨金明,张宙,潘剑飞.开关磁阻式平面电动机及其控制[J].中国电机工程学报,2005,25(19):116-121. 被引量:22
  • 2曹家勇,朱煜,汪劲松,尹文生,段广洪,王春洪.永磁同步平面电动机三自由度运动控制器[J].中国电机工程学报,2006,26(17):143-147. 被引量:15
  • 3Kim W J. High-precision planar magnetic Levitation[D]. MIT, 1997. 被引量:1
  • 4Cho H S, Jung H K. Analysis and design of synchronous permanent magnet planar motors[J]. IEEE Transactions on Energy Conversion, 2002, 17(4): 492-499 被引量:1
  • 5Cho H S, Im C H, Jung H K. Magnetic field analysis of 2-D permanent magnet array for planar motor[J]. IEEE Transactions on Magnetics, 2001, 37(5): 3762-3766. 被引量:1
  • 6Cho H S, Jung H K. Effect of coil position and width on back-EMF constant of permanent magnet planar motors[C]. Electric Machines and Drives Conference, Cambridge, Massachussets, USA, 2001. 被引量:1
  • 7Gao Wei, Dejima Shuichi, Yanai Hiroaki, et al. A surface motor-driven planar motion stage integrated with a XYOz surface encoder for precision positioning[J]. Precision Engineering, 2004, 28(3): 329-337. 被引量:1
  • 8Williams. Precision six-degree-of-freedom magnetically levitated photolithography stage[D]. MIT, 1997. 被引量:1
  • 9Hibbeler R C,王菘,等译.工程力学:动力学[M].北京:电子工业出版社,2006.. 被引量:1
  • 10Binnard M. Planar motor with linear coil arrays. US: 6452292, 2002. 被引量:1

共引文献32

同被引文献18

  • 1张晓峰,林彬.大行程纳米级分辨率超精密工作台的发展方向[J].南京航空航天大学学报,2005,37(B11):179-183. 被引量:10
  • 2李恒,朱煜,贾松涛,武晨光.电磁式超精密微动工作台研究现状与方向[J].现代机械,2007(2):1-3. 被引量:6
  • 3Kuo S K,Menq C H. Modeling and control of a six- axis precision motion control stage[J]. IEEE/ASME Transactions on Mechatronics, 2005, 10(1): 50-59. 被引量:1
  • 4Shan X, Kuo S K, Zhang J, et al. Ultra precision motion control of a multiple degrees of freedom magnetic suspension stage[J]. IEEE/ASME Transa- ctions on Mechatronics, 2002, 7(1): 67-78. 被引量:1
  • 5Verma S, Kim W J, Gu J. Six-axis nanopositioning device with precision magnetic levitation techno- logy[J]. IEEE/ASME Transactions on Mechatronics, 2004, 9(2): 384-391. 被引量:1
  • 6Verma S, Kim W J, Shakir H. Multi-axis maglev nanopositioner for precision manufacturing and manipulation applications[J]. IEEE Transactions on Industry Applications, 2005, 41(5): 1159-1167. 被引量:1
  • 7Verma S, Shakir H, Kim W J. Novel electromagnetic actuation scheme for multiaxis nanopositioning[J]. IEEE Transactions on Magnetics, 2006, 42(8): 2052- 2062. 被引量:1
  • 8Gajdusek M, Damen A, van den Bosch P. Identification and parameter-varying decoupling of a 3-DOF platform with manipulator[C]//International Symposium on Power Electronics, Electrical Drives, Automation and Motion, Ischia, Italy, 2008: 691-696. 被引量:1
  • 9Hol S, Buis E, Weerdt R. Lithographic apparatus, magnetic support for use therein, device manufac- turing method, and device manufactured thereby: US, 6831285B2[P]. 被引量:1
  • 10Hol S, Lomonova E, Vandenput A. Design of a magnetic gravity compensation system[J]. Precision Engineering, 2006, 30(3): 265-273. 被引量:1

引证文献1

二级引证文献5

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部