摘要
文章简述了静压铸造生产线落砂、清理工部的特点,介绍了静压铸造生产线落砂、运输和清理时经常出现的块砂、芯砂混入、铸件磕碰等问题及其解决办法。为使静压线正常运行,必须重视产品铸造工艺设计以及落砂和清理等后处理工序对生产线运行的影响。从工艺设计入手,采取合理的落砂和输送布局;采取与生产线相适宜的铸造工艺,尤其是制芯工艺,减少清理工作量;从铸件生产的流程考虑,采取合理的清理方式,使用高效的清理设备。
The characteristics of shakeout department and cleaning-up department of the static pressure casting production line were briefly described in this paper.During the process of shakeout,conveying and cleanup,the problems which have an important influence on the operation of the line,such as lump sand,core sand and colliding of casts and corresponding solutions were introduced.In order to make sure that the static pressure production line operates normally,the effect of casting technique and post-treatment procedure,such as shakeout and cleaning,should be taken highly seriously.In the designing process,appropriate layout of shakeout department and conveying department should be taken into consideration.And a suitable casting technique matching the line,especially coremaking,should be applied to reduce clearance efforts.In the technological process,reasonable cleaning ways and efficient cleaning equipment shoud be adopted.
出处
《铸造设备与工艺》
2011年第4期24-26,共3页
Foundry Equipment & Technology
关键词
静压铸造生产线
块砂
芯砂混入
磕碰
对策
static pressure casting production line
lump sand
core sand mixing
colliding
countermeasures
