摘要
对二维圆环内孔磨削的温度场和应力应变场用有限元方法进行了仿真。用命令流方式建立了圆环传热有限元分析模型,采用外圆夹紧与盘面夹紧方式进行了对比,计算得到工件的温度场基本上呈环状分布,周向基本均匀,径向温度梯度较大;内孔最大热变形出现在夹紧位置之间,达到了0.030mm,外圆最大热变形达到0.062mm,内孔磨削后将产生较大的形状误差与尺寸误差。磨削内孔已经进入了塑性状态。
The temperature field and stress-strain field are simulated for an internal ground cirque. Finite element models of surface locating and three-jaw chuck clamping have been considered and compared. Computation shows that the temperature in circumference is basically uniform, but radial temperature grad is big. The maximal thermal deformation in ground hole is found in clamping positions, and reaches 0.030ram. In outer circle the maximal thermal deformation reaches 0. 062ram. After ground, the inner hole will form sizeable shape error and dimensional error. In ground process, the inner hole already yielded.
出处
《机械研究与应用》
2011年第4期19-22,共4页
Mechanical Research & Application
基金
湖南省高等学校科学研究项目"超声变幅杆的有限元形状优化与设计"(10C0186)
关键词
内孔磨削
温度场
热变形
有限元
internal gr/nding
temperature field
thermal deformation
finite element method
