摘要
提出膜态沸腾传热的物理模型,建立相应的数学模型,对DNB后膜态沸腾传热特性进行分析,通过实验数据确定关系式系数,得到了DNB后膜态沸腾传热计算模型。本文提出的理论计算模型与现有不同工况范围内取得的实验数据和已有计算模型进行了比较分析,并对计算偏差进行了统计计算。比较结果表明,本文的计算结果与实验数据符合较好,且相对于已有计算模型,本文模型具有较广的适用性。针对各系统参数对DNB后膜态沸腾传热的影响,对所提出的理论计算模型进行了研究,所得结果的规律与已有实验研究结果符合。
It is proposed in this paper a physical model for the film boiling heat transfer. The corresponding mathematical descriptions are given in details and the heat transfer characteristic of post-DNB film boiling is analyzed. The numerical model of post-DNB film boiling heat transfer is obtained as the empirical value of the coefficient is determined by the experimental data. The numerical model is compared with the experimental data of different parameters and other numerical models, and the statistical deviations are calculated. The calculating results of the numerical model in this paper show good agreement with the experimental data, and the numerical model in this paper has comprehensive applicability compared with other numerical models. The effects of thermal-hydraulic parameters on the post-DNB film boiling heat transfer have been numerically researched using the numerical model in this paper. The calculating results are as same as the experimental results.
出处
《核科学与工程》
CSCD
北大核心
2011年第2期146-153,共8页
Nuclear Science and Engineering
关键词
膜态沸腾
DNB后
沸腾传热
计算模型
film boiling
post-DNB
boiling heat transfer
numerical model
