摘要
采用由金属蒸汽真空弧（ Ｍｅｔａｌ Ｖａｐｏｒ Ｖａｃｕｕｍ Ａｒｃ） 离子源引出的强束流脉冲Ｚｒ 、Ｚｒ ＋ Ｃ 离子对Ｈ１３ 钢进行了离子束表面处理。借助划痕仪和摩擦试验机分别测量了经表面处理的Ｈ１３ 钢的耐磨性和摩擦系数。研究结果表明： 经Ｚｒ、Ｚｒ＋ Ｃ 离子束处理的Ｈ１３ 钢的耐磨性有所提高、摩擦系数明显降低。采用卢瑟福背散射谱（ 简称ＲＢＳ） 、Ｘ 射线（ 简称ＸＲＤ） 分析了注入层的成分、结构及其影响其耐磨性的因素。
High dose high heam flux Zr and Zr+C ion beams extracted from a MEVVA ion source were implanted into H13 steel. Wear experiment results showed that the wear rate of the implanted samples dropped significantly. Zr and Zr+C ion beam treatment of H13 steel samples was found to reduce the friction coefficient of H13 steel. Rutherford backscattering spectrum (RBS) was used to measure the surface composition after Zr and Zr+C implantation. Observation of phase induced by Zr、C implantation was carried out by X-ray diffraction analysis (XRD).The wear mechanisms of the implanted layer were discussed.
出处
《江苏石油化工学院学报》
1999年第3期36-39,共4页
Journal of Jiangsu Institute of Petrochemical Technology
基金
国家和江苏省教育委员会自然科学基金
