Orientation Relationships between Ferrite and Cementite by Edge-to-edge Matching Principle
被引量:3
Orientation Relationships between Ferrite and Cementite by Edge-to-edge Matching Principle
摘要
The crystallographic features of pearlite were investigated by experiments and edge-to-edge matching principle. Two new orientation relationships between ferrite and cementite were determinated by selected area electron diffraction and then explained by our modified edge-to-edge matching method. The consistence of the experimental results with theoretical prediction confirms the practicability of the modified edge-to-edge matching model.
基金
supported by the National Natural Science Foundation of China (Grant Nos.51001069 and 51031001)
参考文献24
-
1D.S. Zhou and G.J. Shiflet: Metall. Trans. A, 1992, 23, 1259. 被引量:1
-
2R.J. Dippenaar and R.W.K. Honeycombe: Proc. R. Soc. Lond. A, 1973, 333, 455. 被引量:1
-
3B.L. Bramfitt and A.R. Marder: Metallography, 1973, 6, 483. 被引量:1
-
4Y. Adachi, S. Morooka, K. Nakajima and Y. Sugimoto: Acta Mater., 2008, 56, 5995. 被引量:1
-
5N. Nakada, N. Koga, T. Tsuchiyama and S. Takaki: Scripta Mater., 2009, 81, 133. 被引量:1
-
6D.S. Zhou and G.J. Shiflet: Metall. Trans. A, 1991, 22, 1349. 被引量:1
-
7D. Qiu, M.X. Zhang and P.M. Kelly: Scripta Mater., 2009, 61,312. 被引量:1
-
8S. Tagashira, K. Sakai, T. Furuhara and T. Maki: ISIJ Int., 2000, 40, 1149. 被引量:1
-
9Y.S. Yang, J.G. Bae and C.G. Park: Mater. Sci. Eng. A, 2009, 508, 148. 被引量:1
-
10J. Languillaume, G. Kapelski and B. Baudelet: Acta Mater., 1997, 45, 1201. 被引量:1
同被引文献15
-
1王志成,李伟,郭正洪,戎咏华,张弛.Bagaryatsky取向的铁素体/渗碳体相界结构模拟[J].上海交通大学学报,2005,39(1):14-17. 被引量:3
-
2盛钟琦 肖洪 彭峰 等.A508-3钢热处理后的显微组织.核动力工程,1988,9(1):49-53. 被引量:3
-
3李春志.电子衍射谱分析中的一种有效方法.物理学报,1979,28(3):314-323. 被引量:12
-
4Shibamoto H, Kimura A, Hasegawa M, et al. Effects of proton irradiation on reactor pressure vessel steel and its model alloys [ J ]. Journal of ASTM International,2005,2 ( 9 ) : 309 - 316. 被引量:1
-
5Was G S, Hash M, Odette R G. Hardening and microstructure evolution in proton-irradiated model and commercial pressure-vessel steels [ J ]. Philosophical Magazine ,2005,85 (4 - 7 ) :703 - 722. 被引量:1
-
6Faulkner R G, Lu Z,Ellis D,et al. Effects of neutron irradiation on precipitation in reactor pressure vessel steels[ J J. Journal of ASTM International, 2005,2(10) :285 -299. 被引量:1
-
7Soneda N, Dohi K, Nishida K,et al. Microstructural characterization of RPV materials irradiated to high fluences at high flux [ J ]. Journal of ASTM International,2009,6 ( 7 ) : 129 - 152. 被引量:1
-
8Zhang M X,Kelly P M. Accurate orientation relationships between ferrite and cementite in pearlite [ J ]. Scripta Materialia, 1997,37 (12) :2009 - 2015. 被引量:1
-
9Zhang Y D, Esling C, Calcagnotto M, et al. New insights into crystallographic correlations between ferrite and cementite in |amellar eutectoid structures, obtained by SEM-FEG/EBSD and an indirect two-trace method [ J]. Journal of Applied Crystallography ,2007,40 (5) :849 -856. 被引量:1
-
10Norgett M J,Robinson M T,Torrens I M. A proposed method of calculating displacement dose rates J ]. Nuclear Engineering and Design, 1975,33 (1) :50 -54. 被引量:1
引证文献3
-
1丁辉,雷静,束国刚,万强茂.质子辐照A508-3钢显微组织和物相取向关系[J].材料热处理学报,2014,35(2):51-56. 被引量:1
-
2Ke-chang Shen,Gui-hua Li,Yi-min Sun,Yong-gang Wang,Ying-jie Li,Guang-hui Cao,Wei-min Wang.Linking anisotropy with Fe_3C distribution in AISI 1045 steel[J].International Journal of Minerals,Metallurgy and Materials,2015,22(12):1293-1303.
-
3孙淑华,高扬,蔡敏,傅万堂.碳钢中不同终端的渗碳体(001)表面结构及稳定性的理论研究[J].燕山大学学报,2016,40(6):543-547. 被引量:2
二级引证文献3
-
1李承亮,吴昊,刘飞华,晏井利.反应堆压力容器钢质子辐照研究进展[J].中国材料进展,2019,38(2):138-147. 被引量:2
-
2孙少波,余凌.吹灰器跑车20CrMnTiH齿轮断裂分析[J].中国设备工程,2022(7):148-150.
-
3赵祥路,王壮壮,苏广兰,殷凤仕.一种大尺寸20CrMnTi渗碳齿轮断裂失效分析[J].热加工工艺,2023,52(4):160-162. 被引量:1
-
1王凤英,赵异萍.SM490B 钢 CO_2 气保焊焊接材料的选择[J].山西机械,1998(4):24-25.
-
2邹增辉,董曼,曹晓民.ZG35CrMo连杆的补焊工艺[J].金属加工(热加工),2014(24):42-43.
-
3卓君,谢杰,王培科.Q690低合金高强度钢的焊接试验分析[J].煤矿机电,2015,36(5):70-71. 被引量:2
-
4王凤英,孔海旺.SM490B钢焊接工艺的研究[J].山西机械,1999(1):14-16.
-
5孙咸.工程应用获好评,焊材工艺显其能(下)——双相不锈钢焊接材料应用综述[J].金属加工(热加工),2012(12):62-64.
-
6严鸢飞,杨毅,印建正,陈伯蠡,王振家.钢焊接接头的强韧性设计原则的研究[J].机械工程学报,1996,32(2):101-105. 被引量:15
-
7吴璐,潘复生,杨明波,程仁菊,汤爱涛.Mg-9Al-1Zn-(0-0.6)Sr镁合金铸态组织及晶粒细化研究[J].功能材料,2014,45(2):63-67. 被引量:7
-
8黄瑶,王雷刚,聂爱琴.摩擦学涂层技术在模具减摩抗磨中的应用[J].机械工程师,2004(1):55-58. 被引量:4
-
9黄元春,肖政兵,刘宇.Crystallography of Zr poisoning of Al-Ti-B grain refinement using edge-to-edge matching model[J].Journal of Central South University,2013,20(10):2635-2642. 被引量:3
-
10陈瑜.310s与Q235异种钢焊接(性能)分析[J].低碳世界,2016,6(13):22-24. 被引量:3