期刊文献+

固溶处理对铸态Mg-4Al-2Si合金组织和性能的影响 被引量:5

Effects of Solution Treatment on Microstructure and Mechanical Properties of Mg-4Al-2Si Alloy
下载PDF
导出
摘要 研究了固溶处理对铸态Mg-4Al-2Si(AS42)合金组织和性能的影响。结果表明,铸态与热处理态合金均由α-Mg基体、β-Mg17Al12相和Mg2Si相3部分组成。固溶处理使合金中的β-Mg17Al12相发生部分溶解,汉字状Mg2Si相颗粒出现球状化,合金的力学性能有较大幅度的提高。铸态与热处理态合金的断裂形式均为准解理脆性断裂。 Effects of solid solution treatment(T4) on microstructure and mechanical properties of Mg-4Al-2Si(AS42) alloy were investigated.The results show that the alloy at both as-cast and heat treatment states is composed of α-Mg matrix,β-Mg17Al12 phase and Mg2Si phase.Mechanical properties of the T4 treated alloy are remarkably improved as a result of partially dissolution of β-Mg17Al12 phase and the spheroidization of Chinese script Mg2Si phase.The fracture mechanism of the both as-cast and T4 treated alloy is characterized by quasi-cleavage brittle fracture.
作者 宋佩维
出处 《特种铸造及有色合金》 CAS CSCD 北大核心 2011年第4期311-314,394,共4页 Special Casting & Nonferrous Alloys
基金 陕西省自然科学基础研究计划资助项目(2010JM6009) 陕西省教育厅自然科学专项科研计划资助项目(2010JK470)
关键词 Mg-4Al-2Si镁合金 固溶处理 显微组织 力学性能 Mg-4Al-2Si Alloy,Solid Solution,Microstructure,Mechanical Properties
  • 相关文献

参考文献18

  • 1MORDIKE B L, EBERT T. Magnesium properties application-po- tential[J]. Materials Science and Engineering, 2001, A302: 37-46. 被引量:1
  • 2刘正,王越,王中光,李锋,申志勇.镁基轻质材料的研究与应用[J].材料研究学报,2000,14(5):449-456. 被引量:175
  • 3PEKGULERGUZ M O, BARIL E. Creep resistant magnesium die casting alloys based on alkaline earth elements [J]. Materials Transaction,2001, 42(7) : 1 258-1 267. 被引量:1
  • 4BRONFIN B, KATSIR M, AGHION E. Preparation and solidifi- cation features of AS21 magnesium alloy[J]. Materials Science and Engineering, 2001, A302: 46-50. 被引量:1
  • 5KAREL M, FERDINAND D. Creep behaviour of a magnesium al-loy AS21 and its fibre-strengthened composite[J]. Journal of Al- loys and Compounds, 2004, 378: 167-171. 被引量:1
  • 6QIN Q D, ZHAO Y G, ZHOU W, et al. Effect of phosphorus on mierostrueture and growth manner of primary Mg2Si erystal in Mg2Si/Al eomposite[J]. Materials Science and Engineering, 2007, A447: 186-191. 被引量:1
  • 7JAE J K, DO H K, SHIN K S, et al. Modification of Mg2Si mor- phology in squeeze cast Mg-Al-Zn-Si alloys by Ca or Paddition[J]. Scripta Materialia, 1999, 41(3): 333-340. 被引量:1
  • 8BARBAGALLO S, CAVALIERE P, CERRI E. Compressive plas- tic deformation of an AS21X magnesium alloy produced by high pressure die casting at elevated temperatures[J]. Materials Science and Engineering, 2004, A367: 9-16. 被引量:1
  • 9LU Y Z, WANG Q D, ZENG X Q, et al. Behavior of Mg-6Al-xSi alloys during solution heat treatment at 420 ℃ [J]. Materials Sci- ence and Engineering, 2001, A301: 255-258. 被引量:1
  • 10王业双,张咏波,王渠东,马春江,丁文江,朱燕萍.Mg-9Al合金铸造凝固模型[J].金属学报,2002,38(5):539-543. 被引量:13

二级参考文献10

共引文献186

同被引文献63

引证文献5

二级引证文献9

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部